750 % 1100 slabby fairing/ side panel differences

[baldrick]

as the title, do you know if 750 panels and fairing  will fit on 1100, just to save me buying stuff that wont fit0?

 

for a slabside, cheers

[Macduff]

From bits I've come across (ignoring the peculiarities of the 750F)  I've heard the front cowls are the same between 750/1100 , Side panels are different & unsure on belly pan pieces . I think  the 1100 front subframe is different to the 750 as is the rear cowl upper brace. 

[baldrick]

Cheers Macduff.

if that's where you come from, you are just along the road from me. small world.

[banoffee]

I thought the fairing sides were the same between 750 G/H and 1100... just the engine mounting bolt hole is on a different place.... same moulding you can see the drill point for each on the same panel. Or maybe just the ones I’ve seen...

[eddiegsx]

Same here, I bought a 750 side panel for my 1100H seems to fit fine.

[baldrick]

good to know, thanks.

[duncan]

Have always mixed an matched whatever reasonably unbroken panels I could get my hands on no issues as long as you keep in mind the differences of F model front panels.

[davecara]

On 7/20/2019 at 8:46 PM, Macduff said:

From bits I've come across (ignoring the peculiarities of the 750F)  I've heard the front cowls are the same between 750/1100 , Side panels are different & unsure on belly pan pieces . I think  the 1100 front subframe is different to the 750 as is the rear cowl upper brace. 

Are the 750f on their own then? I know the sides are different but what about the top fairing?

[banoffee]

6 minutes ago, davecara said:

Are the 750f on their own then? I know the sides are different but what about the top fairing?

Yes, all painted fairing parts are specific to the F.

[Swiss Toni]

@davecara750F top fairing has 3 mounting holes for mid panels ... G & H have 2. 

Edited July 23, 2019 by Swiss Toni

[duncan]

And F top fairing has only a single bolt to the fairing stay at the bottom. G-H have two.

13 hours ago, banoffee said:

Yes, all painted fairing parts are specific to the F.

All parts? I've never really noticed (structural) differences on the tail bits

[banoffee]

21 minutes ago, duncan said:

All parts? I've never really noticed (structural) differences on the tail bits

That’s because they’re seat unit bits not fairing bits 

[Swirl]

Do f fairings fit g/h if you use it all and vice versa

[davecara]

57 minutes ago, Swirl said:

Do f fairings fit g/h if you use it all and vice versa

From what I can gather, as long as you keep the main fairing mount as the same model as the fairing you can stick em on any frame you want

[p4ddy]

I have an H nose cone on an F bracket, I just made a bracket to mount it to a single hole.