CockneyRick

i'd say your 2nd cable is GS as they had adjuster in middle of cable

Hope that's not the weather now!

Re measured without cush drive & Busa is 165mm. So hub is virtually same as Srad. Only help is wheel width & the hope that the carrier is shallower? When i did mine on the Yosh, i had to machine down the Busa carrier to help centre that one! Before & after. Still a close fit tho!

M/N are 770mm too And never had a problem with mine on the Efe! Mebbe your springs/oil was fooked?

Here

And would that mean all Srad rear wheels are the same? 5.5x17?

So from leading edge of Cush hub thru to disc is 195mm K, & 170mm Srad? Did the 170 include that sticky out bit on disc side?

Will do when i open garage

As said, more interested in the hub width, as the wheel size can be 6" & still be smaller than a 5.5" wheel hub!

Can u measure it for us please?

The one i have tried to fit is a Busa, but mebbe the srad is narrower on the hub, but if it's same wheel as the K series, it won't cos i tried that in my Yoshi before going to Busa!

Looking for summat else & found 1 cable. Do u still want it?

So the wheel is a 5.5x17 & i have put a busa (6x17) in the drag bike but it's too far off centre. So can anyone tell me the measurement across the hub, from the sprocket seat face through to the outer edge of disc on other side? Busa is 8" so i need smaller. I know the K series is bigger, just need a 5.5 or 6" wheel to go in with more space to centre it. Could be 600/TL or any other with straight spokes?

Will dig it out tomoz, can you pm me ur Addy

Bugger, can't find em?

Got a spare float if you need one

So there you have it, 1100L/M best option, then 750L after that. As said K series may look better but overall they fail on such a heavy brute of a bike

Looks ok to me

Might have some in garage, you can try & if any good just cover postage

Not trying to convince you, @ZenViking is the one my advice is for! And chances are, he won't find any as they're rare as rocking horse shit!

Pogo stick? i've used 3 sets of these forks over the years & oil change sorts any issues. But if not, re-valve &/or stiffer springs easily improves what i consider a decent fork for it's age

He's on about front end!

Down side to K series as opposed to Slingy 11, is they are much shorter. Got K's in my Yoshi GS which keeps it very low, but the efe has the longest forks Suzuki made & suit the efe much better. yes they are heavier, but it's a brute of a bikew that can handle a few extra pounds, & just eat less pies

Many thanks now that's me start point

If you can please matey