Jdeac

Apart from this one!!!!!!

Was just showing you what I saw mate

This is the last post i can see on face ache

This motor was built by fbm/loopey has been a drag bike for many years. I'm just refreshing it. As I had gearbox issues last season. Pulled the head for oil drain oring change. Saw the cracks around plug holes etc. So decided to swap the head. Thanks @clivegto So I now need to work out how to get the comp ratio in the right place. Is there different thickness ones available etc. Do I need to get the head skimmed. Again all new to me this turbo stuff Pic of the bike that I ran last year. And I'm trying to get sorted again

I also just put 1mm for head gasket. As I can't seem to find specs for thicknesses

Like this?

Yes I belive so. The head was refreshed for me by @clivegto the original head was on the bike already. Its cracked which is why the change. This is the motor from my drag bike pyro. As said I'm new to all this. And what do you mean the .74 omitted??

Comparison of the old to new head.

Not sure what your saying. I've never done this before. Tha calculator asks for the height and the volume. Can I leave the height out. The old head was heavily skimmed compared to the new one. Intercooled turbo on race fuel. If that makes any difference

This is how I've entered the info on a calculator

Hi all. Need a little help working out what thickness head gasket I need to order. Pictured Is what I have so far. Measurement wise. The old head gasket is long gone and this is a new head going on the motor. I keep getting wierd results on ratio calculators.

Is there not something about recirculating Bov's dumping the boost pressure straight back into the turbo air inlet. To keep the turbo spinning a little more on shifts. Not quite what your asking. But surely there is some benefit to this

Maybe something like this under the turbo. And also the crank case breather into a catch can

How would I go about getting the oss logo on there???

Cheers. Not something I've done before. Like what you say about it could be personalised

I've been sat bored drinking But tinkering. What's the opinion on this?? Cleaned the cover up a little and went mad and made an infill. always forget pics. And I don't really have a use for this cover. Nor am I a polishing pro

I've heard of woodcraft. But nt sure if they did oil boiler stuff

So any ideas to the maker of this cover??

Wasn't really looking at selling mate. But I could be open to an offer as I have a couple of different ones

Anyone seen a cover like this before? I'm wondering if it had a window or plate In it originally. And who made it

Same hear. @clivegtomust have got rid of the chickens and invested in scouts to find bike parts!! Lol

It is indeed. Purchased on hear. The guy that makes them does alsorts of stuff fi turbo etc etc

Look like thus they do