clivegto Posted September 8, 2018 Posted September 8, 2018 Not done this before but am I right in thinking a mk1 gsxr 1100 swinging arm can be swapped into a mk1 gsxr 750 so long as I use the dog bones linkage that belongs to the swinging arm. Pics are JMC arm I want to swap to the 750 frame. 1 Quote
gray711 Posted September 8, 2018 Posted September 8, 2018 Yep, 11arm needs 11 linkage due to the way the bearings are configured 1 Quote
clivegto Posted September 9, 2018 Author Posted September 9, 2018 (edited) 13 hours ago, gray711 said: Yep, 11arm needs 11 linkage due to the way the bearings are configured What about shock length. Edited September 9, 2018 by clivegto Quote
dupersunc Posted September 9, 2018 Posted September 9, 2018 1 hour ago, clivegto said: What about shock length. Need the 750 shock. mount on the 1100 frame is in a different position. iirc. 1 Quote
gray711 Posted September 9, 2018 Posted September 9, 2018 I used 750 shock in mine as 11 too long. 1 Quote
manden Posted September 13, 2018 Posted September 13, 2018 the swingarm is also shorter on the 750 Quote
dupersunc Posted September 13, 2018 Posted September 13, 2018 7 hours ago, manden said: the swingarm is also shorter on the 750 only on the f model. 1 Quote
clivegto Posted October 25, 2018 Author Posted October 25, 2018 3 hours ago, R1guy said: @clivegto- did you do this swap? No working on fiting a slingshot jmc arm into a 750 slabby. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.