Gsx750es k1 swingarm

[Mariobasso]

Hi all...

new here. Modified my b12 and currently working on a gsx750es

plan is to swap the engine (750gixer) wheels fork and swingarm.

got the k1 swingarm in but i’d like to know if anyone ever did this conversion and if i could have a look at the linksystem

just to be shure i’m doing this correctly.

 

many thanks

[wraith]

Welcome to OSS, 

Try looking at the project pages 

Ps we all like pics on here 

[Swirl]

Wraith is right no pics it hasn't happened, anyway welcome and where's the pics 

[Swiss Toni]

Welcome to OSS, Mario. And ... where's those pictures??? 

[Mariobasso]

Tnx all. 

Edited April 16, 2018 by Mariobasso

[Mariobasso]

[Mariobasso]

Ah got it lol

 

swingarm still has to come down. I got the linksytem this far. Be welding new shock mounts. 

[Mariobasso]

And this is my b12 btw

[Swirl]

Swinger in the es looking good, 

[Swirl]

8 hours ago, Mariobasso said:

I've got this to do with a 1999 srad arm and slingshot front end, any pics and advice will be appreciated 

[Mariobasso]

On 16-4-2018 at 11:50 PM, Swirl said:

Swinger in the es looking good, 

Tnx m8

[Mariobasso]

On 17-4-2018 at 7:54 AM, Swirl said:

I've got this to do with a 1999 srad arm and slingshot front end, any pics and advice will be appreciated 

Swinger i’m still looking in to..got a mate with a k1 so will be getting some mesurements from him. Will post it here. 

Front end i took the original stem from the ES and asked the metal shop to fit it in to the busa yoke.

they had to make a spacer and then pressed it in. Since the ES stem is originaly welded. 

To secure it i drilled a 6 mm treaded hole on the back of the bottom yoke through the stem and scewed a M6 bold in...just to be shure

[Mariobasso]

Got the linkage the right way now. Rebuilt the mounts and using a Bking shocker. These dogbones  are temporary.the are just for the mock up . When the lump is in i wil” change them

[SiBag]

Nice work, looking good so far.

Oh and welcome to OSS.