Blandit 1200 - which carbs?

[Dezza]

Will the carbs from an 1100 slabside work OK on a 1200 Blandit engine? What is the likely outcome of doing this? Cheers in advance

[Sam-Jaffa]

I think @Ben Slabby is running them on his

[Foz]

Aren’t slabby carbs 34mm and a bandit 36mm ??

[Solcambs]

Bandit are defo 36mm. I was running some on my GSXR1100M engine. Worked ok but needs an air box really. 

[Dezza]

I have a 1200 Blandit motor to go in my Spondon frame as the original motor, which is made up of slabby 750 and 1100 bits, needs a rebuild. The bike came with some 1100 slabside carbs that are in good condition so I just need to know if using them will bugger up the running of the Blandit motor. I will be getting other carbs eventually but my priorities are with the cycle parts. If I need different carbs sooner rather than later then I can keep an eye out for a set otherwise they can wait a while

[vizman]

6 hours ago, Sam-Jaffa said:

I think @Ben Slabby is running them on his

i think Ben has flatties on his

[Sam-Jaffa]

Just now, vizman said:

i think Ben has flatties on his

I stand corrected 

[vizman]

i've ran slabby 11 carbs on a b12 motor, i'm pretty sure i used the slabby 11 rubbers.

[Rene EFE]

It'll work without any issues, as long as you have the inletrubbers that go with the carbs, as @vizmanstated. 

[Dezza]

OK, many thanks to all. I have the inlet rubbers for both so I will probably try first the carbs I have

[Ben Slabby]

Late to the party as always. They are slabby carbs, @Sam-Jaffa, but the flatslides from the seven fiddy.

[Sam-Jaffa]

I was close