Jdeac1981 Posted October 3, 2017 Posted October 3, 2017 (edited) Hi all could some 1 tell me the outlet diamiter of the gsxr 1000 k1-4 headers that fit our oilcooled motors. Cheers jon Edited October 3, 2017 by Jdeac1981 Quote
davecara Posted October 3, 2017 Posted October 3, 2017 I'll get the vernier over my spare set when I get home, be about 9 o'clock unless someone beats me to it! Quote
Jdeac1981 Posted October 3, 2017 Author Posted October 3, 2017 Nice one. I take it that the link pipe or can will be a slip over style aswell. Cheers Quote
Blue Posted October 3, 2017 Posted October 3, 2017 (edited) See if I can measure my set that are for sale. They are k5-6 that were modded to fit oil cooled Edited October 3, 2017 by Blue Quote
Jdeac1981 Posted October 3, 2017 Author Posted October 3, 2017 Are they forsale on hear?? Im looking to see if the cans I have will work before I purchase. Quote
davecara Posted October 3, 2017 Posted October 3, 2017 43mmi make that to be. The standard link pipe has a butterfly valve in it with cables coming off it and a bolt on can Quote
Jdeac1981 Posted October 3, 2017 Author Posted October 3, 2017 Top job thanks for doing that. Cheers jon Quote
Jdeac1981 Posted October 3, 2017 Author Posted October 3, 2017 (edited) @davecaraWould you be able to measeure the diamiter of the tube/pipe engine side of the welds circled. Looking to make them into a twin can setup. Should be circled in the pic. Cheers jon Edited October 3, 2017 by Jdeac1981 Quote
davecara Posted October 3, 2017 Posted October 3, 2017 a smidge under 42mm directly behind the weld (header side of the weld) then that narrows slightly to 39mm before it flares out into the collector. They're not butt welded where you've circled so it may be possible to grind the welds back and separate the pipes, be prepared for lots of white sparks though!! Quote
Jdeac1981 Posted October 3, 2017 Author Posted October 3, 2017 You are a top man. Much appreciated. Cheers Quote
Jdeac1981 Posted October 3, 2017 Author Posted October 3, 2017 @davecara Do you know if I would be better of running a v sump on my b12 750 or will the original b12 sump be fine. It's a mk2 if that makes any difference. Quote
davecara Posted October 3, 2017 Posted October 3, 2017 No idea would be the honest answer! They hang pretty low under every oil cooled engine I've put them on so there's plenty of clearance for you to get some heat in there and bend them up to fit properly Quote
dupersunc Posted October 4, 2017 Posted October 4, 2017 11 hours ago, Jdeac1981 said: @davecara Do you know if I would be better of running a v sump on my b12 750 or will the original b12 sump be fine. It's a mk2 if that makes any difference. I ran them with a flat sump no problem. Quote
wraith Posted October 4, 2017 Posted October 4, 2017 Will clear the sump OK, but you do need spacers for the headers, well you do when you have the k zorst on a oilcooled motor in a aircooled frame 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.