Zepp Posted July 31, 2016 Posted July 31, 2016 This lump has been sitting in bits for months. Finally spent a few hours putting it all back together this weekend. Most folk opt to upgrade their engine. I've 'detuned' it on this build by fitting Busa pistons rather than the JE's I had in it. I have however done a bit of porting in the intakes and exhaust. A first for me on such an engine but I did have quite a bit of success years ago on Mini A series engines by porting and fitting larger valves from 1800 Marina heads. I've put the JE's on the shelf for now ready for an all out motor in a future project. 6 Quote
Ragerover Posted October 24, 2016 Posted October 24, 2016 where did uou get your bellmouth from ??? Quote
Zepp Posted October 24, 2016 Author Posted October 24, 2016 On 01/08/2016 at 4:02 PM, t3rse said: What did you use for paint? I used PJ1 gloss Quote
Zepp Posted October 24, 2016 Author Posted October 24, 2016 8 hours ago, Ragerover said: where did uou get your bellmouth from ??? I made it from a toy trumpet. It was made of ally so easy enough to weld a flange to it. 2 Quote
Ragerover Posted October 24, 2016 Posted October 24, 2016 Ha ha awesome been looking for one for mine Quote
Pheasantplucker Posted December 22, 2016 Posted December 22, 2016 how are you getting on with this one? Quote
Zepp Posted December 23, 2016 Author Posted December 23, 2016 10 hours ago, Pheasantplucker said: how are you getting on with this one? Engine still sat there. Frame is on the bench waiting for me to modify it. Quote
Pheasantplucker Posted December 23, 2016 Posted December 23, 2016 What turbo are you using? I really like the look of a draw through set up. Sit that motor in front of the TV, something good to watch for a change! 1 Quote
dixiethedog Posted December 24, 2016 Posted December 24, 2016 I was going to ask the same thing about the bell mouth. lol. I'll now be looking in toy shop's for alloy trumpet's. What frame are you putting it into??? This will be one to watch. Quote
Zepp Posted December 24, 2016 Author Posted December 24, 2016 20 hours ago, Pheasantplucker said: What turbo are you using? I really like the look of a draw through set up. Sit that motor in front of the TV, something good to watch for a change! The turbo is Rajay fb60 1 Quote
Zepp Posted December 24, 2016 Author Posted December 24, 2016 52 minutes ago, dixiethedog said: I was going to ask the same thing about the bell mouth. lol. I'll now be looking in toy shop's for alloy trumpet's. What frame are you putting it into??? This will be one to watch. It's going back in the big tube Izax frame. 5 Quote
Ragerover Posted December 24, 2016 Posted December 24, 2016 Nice frame as well never seen an Izax frame before Quote
Pheasantplucker Posted December 24, 2016 Posted December 24, 2016 4 hours ago, dixiethedog said: I was going to ask the same thing about the bell mouth. lol. I'll now be looking in toy shop's for alloy trumpet's. What frame are you putting it into??? This will be one to watch. They do some nice stainless shapes in the cook shop!!!!!!!!!!!!!!! Quote
gsx Posted January 26, 2017 Posted January 26, 2017 On Saturday, December 24, 2016 at 10:43 AM, Zepp said: It's going back in the big tube Izax frame. Wit woo , lovely Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.