Ham fisted

[gsxrchop]

Gurus, 

Looking at switching out my old flatslides on my 86 gsxr 750 to a set from a 97 model. 

Any suggestions /warnings etc?

[kokolis]

97? Thats srad, different spacing.

[Captain Chaos]

and downdraugt carbs on the SRAD. Won't work.

[gsxrchop]

Well I guess that answers that.... Any suggestions for a decent CV carb that will work on a 750 bored to 955 with a significant amount of headwork?

On ‎5‎/‎31‎/‎2016 at 3:06 PM, Captain Chaos said:

and downdraugt carbs on the SRAD. Won't work.

 

[Rene EFE]

Rebuild the flats, they will simply be better

[Ben Slabby]

4 hours ago, Rene EFE said:

Rebuild the flats, they will simply be better

+1 for this. What's wrong with the VM's? Just tired? 

[Del]

On 06/06/2016 at 6:42 PM, gsxrchop said:

Well I guess that answers that.... Any suggestions for a decent CV carb that will work on a 750 bored to 955 with a significant amount of headwork?

 

You can bore the vm29 flatties out to 33mm on the intake side(they are already 33mm on the outlet)

 

[gsxrchop]

The problem is actually hanging onto the bars  sounds like I just better learn how to properly manage throttle control rather than changing the carbs.  The VMs are already bored out to 33 and I have a set of RS38 that will be tried when the motor is back from its machining adventures at various shops.

[FJD]

The 34mm std gsxr 1100 1'st gen aktually work really good, i also have some bikes with flats, but on the street usually i'm more comfortable with cv carbs, so i have my head free for traffic/corners