Swiss Toni Posted January 20, 2016 Posted January 20, 2016 Anyone ID these forks? 43mm stanchions x 732mm long, 20mm axle. Inside of legs (nr mudguard mount) is cast 8255-L & 8255-R. Left and right, obviously. Yokes are 205mm centres and have X8591 cast underneath. I thought they might be 750 J/K, but on looking at the fork chart, J/K's are 43mm x 556mm long! Are they even Suzuki? Quote
Swiss Toni Posted January 20, 2016 Author Posted January 20, 2016 1100K/L come out at 780! Bit of a dilemma? Quote
Captain Chaos Posted January 20, 2016 Posted January 20, 2016 RF900 maybe? Not B12 because fully adjustable. Is the caliper bolt spacing 90mm? Quote
Swiss Toni Posted January 20, 2016 Author Posted January 20, 2016 (edited) Yup! It was sold to me as B12. I now know it isn't. I also got a B12 front wheel with it, but I now know B12 has straight spokes. This one hasn't! Edited January 20, 2016 by Swiss Toni Quote
Captain Chaos Posted January 20, 2016 Posted January 20, 2016 top yoke looks very much like a 1100K one. RF top yoke is completely different. Quote
Captain Chaos Posted January 20, 2016 Posted January 20, 2016 18 minutes ago, Swiss Toni said: looking at the fork chart, J/K's are 43mm x 556mm long! 556mm long? I think your chart is not trustworthy. Quote
Swiss Toni Posted January 20, 2016 Author Posted January 20, 2016 Well...you better have a word with Mr 7/11. It's his chart! Quote
Swiss Toni Posted January 20, 2016 Author Posted January 20, 2016 (edited) Couple more. Just had a look at RF900 forks on eblag, and the threaded side for the axle has an offset. And...those threaded holes in the top yoke? I thought they were home made for risers, but strengthening bosses underneath prove otherwise! Edited January 20, 2016 by Swiss Toni Quote
Captain Chaos Posted January 20, 2016 Posted January 20, 2016 (edited) those threaded holes in the top yoke are for mounting the clip-ons. They are above the yoke on 1100s, unlike 750s. Pic of bottom of top yoke? If it has 4 threaded holes for mounting the clocks, they are 99% sure 1100K. Edited January 20, 2016 by captain chaos spelling misteak 2 Quote
Swiss Toni Posted January 20, 2016 Author Posted January 20, 2016 Last one, for the time being! I'll have a look under the top yoke tomorrow cap'n. But...as you'll see by the latest 'photo...732mm. How about 750 legs (but there's no 750 legs that short on the chart), and 1100K/L yokes? Have to be tomorrow for 'photo. Bastard thing won't let me load it! Quote
Jaydee Posted January 21, 2016 Posted January 21, 2016 Looks like the 11K front end I have sitting in the garage. Check the fork top centers, 11K are 205mm apart. 732mm fork length sound about right. Quote
Captain Chaos Posted January 22, 2016 Posted January 22, 2016 On 2016-01-20 at 7:02 PM, Swiss Toni said: Yokes are 205mm centres @Jaydee first post of the thread anyway.... 1100K. Quote
Jonboy Posted January 22, 2016 Posted January 22, 2016 (edited) wouldnt be 1100L as they were wrong way uppers, 1100K for me.. Edited January 22, 2016 by Jonboy idiot writing Quote
Jaydee Posted January 22, 2016 Posted January 22, 2016 7 hours ago, captain chaos said: @Jaydee first post of the thread anyway.... 1100K. Must learn to read stuff. I just like looking at the pickshurs me. Quote
Swiss Toni Posted January 22, 2016 Author Posted January 22, 2016 Jay, if they're easy to get at...would you mind measuring your fork legs for me? I will be getting rid of them shortly, and don't want to make out they're something they're not! I need something longer, to make up for the 810mm of the ET. Quote
Jaydee Posted January 22, 2016 Posted January 22, 2016 3 hours ago, Swiss Toni said: Jay, if they're easy to get at...would you mind measuring your fork legs for me? I will be getting rid of them shortly, and don't want to make out they're something they're not! I need something longer, to make up for the 810mm of the ET. Just measured them, 750mm'ish from axle center to top of fork (not including preload adjuster) Yours might be 750K then 20mm shorter???? Quote
Captain Chaos Posted January 22, 2016 Posted January 22, 2016 the top yoke at least is 1100K, maybe the rest is from a 750J/K Quote
Jaydee Posted January 22, 2016 Posted January 22, 2016 Same top yoke as mine. 750 yoke has c+ 3 minutes ago, captain chaos said: the top yoke at least is 1100K, maybe the rest is from a 750J/K Yeah, identical top yoke to the 11K one I have. Could be 750 forks with 11 yokes. Quote
Swiss Toni Posted January 25, 2016 Author Posted January 25, 2016 Ok boys. So, it's 1100 yokes/750J/K legs! Thanks for your input! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.