Chain and sprocket question

[Kevref]

2 questions!!!! Trying to buy correct sizes first time !!!

Can anyone advise what minimum chain length I will need for my Gs conversion. It has a bandit 1200 swing arm , running a 48 rear sprocket. Would 118 be long enough ? ( easier to remove links!!!) 

regarding the front sprocket , what offset size will I need with the bandit swing arm on the gs 750 frame.?

thanks in advance 

 

[TonyGee]

to avoid any cockups I just buy the longest chain I can find, then just chop it down to size.  I don't do maths 

[Joseph]

https://www.rbracing-rsr.com/chainlength.html

[TonyGee]

52 minutes ago, Joseph said:

https://www.rbracing-rsr.com/chainlength.html

there you go with bloody maths again   

[Joseph]

If putting in the Sprockets tooth count and measuring the distance between both is too complicated for you, well... 

[wraith]

I'm running a 120 link on the kat with gsxr750wr swing arm. 

I won't look for anything less than that. Best way is, if you have a old chain or know someone with one, put that on and then count the amount of links you need extra around the rear sprocket.

[TonyGee]

3 hours ago, Joseph said:

If putting in the Sprockets tooth count and measuring the distance between both is too complicated for you, well... 

its not about being complicated its I have a problem with reading numbers  

[slayer61]

120 got me through my conversion from 630-530 using a Metmachex arm.