750 Slabbie without belly pan

[johnnyboy]

Hi all, just getting a 750 ready to ride and I don’t have the belly pan, and I actually prefer the look without it tbh.

However, the mid panels are quite wobbly without it, is there a bracket out there or a regular fix to firm them up?

Thanks

Ps -  not my bike but you get the idea… 

 

 

[Swiss Toni]

Should be a domed nut on either side of the head, tapped to 6mm. 

[davecara]

Yes there is. If I remember right, @Rossco(Iceman Josros)has them on his. They bolt along the bottom of the mids 

[davecara]

They’re the slingshot ones for reference. Not that difficult to make to be fair

[johnnyboy]

I have the domed things on the head  bolted up, still wobbly.

Any ideas where the brackets are from? 

[baldrick]

some lad on fb was making them, but they weret cheap. 

im sure you could knock some up out of 16 guage for a lot less

[johnnyboy]

Funny you should say that…. 
 

big arrow is where the rubber mount thingy on the head goes… let’s see how it goes. Ordered new rubber mounts as well (not cheap) 
 

[carlinmidarlin]

I made these for mine

Carbon n resin

[johnnyboy]

i think you win  

Great job. 
 

[Rossco(Iceman Josros)]

On 7/18/2022 at 9:32 PM, carlinmidarlin said:

I made these for mine

Carbon n resin

Could I commission a pair from you ??

[Rossco(Iceman Josros)]

On 7/13/2022 at 11:11 PM, davecara said:

Yes there is. If I remember right, @Rossco(Iceman Josros)has them on his. They bolt along the bottom of the mids 

No mine just flap in the breeze @davecaranot good on the old plastic so probably putting the belly pan back on 

[R1guy]

3 minutes ago, Rossco(Iceman Josros) said:

Could I commission a pair from you ??

+1

On 7/18/2022 at 9:32 PM, carlinmidarlin said:

I made these for mine

Carbon n resin

@carlinmidarlin- if you did a run of 10x of these, I expect they’d get snapped up 

[johnnyboy]

i think you win  

Great job. 
 

[johnnyboy]

i’d have a pair, I’m in the uk but depends on price and when they’d be ready.

not sure if he made a mould… 

[carlinmidarlin]

Hi guys

just an update  to all that have asked about my bits I made, yes I did make a mould, but I’ve only got 1 so if it fucks up I can’t do loads plus I’m mad busy at work and other shit on at the min, I could do some for you lads but it’s not a quick job

[Rossco(Iceman Josros)]

On 7/20/2022 at 8:01 PM, carlinmidarlin said:

Hi guys

just an update  to all that have asked about my bits I made, yes I did make a mould, but I’ve only got 1 so if it fucks up I can’t do loads plus I’m mad busy at work and other shit on at the min, I could do some for you lads but it’s not a quick job

Sooo are we on buddy ?? 

[carlinmidarlin]

I started 1  tonight to see how it held up, and things look good so far, even out th mould there’s lots of work to be done

 

Edited July 21, 2022 by carlinmidarlin

[carlinmidarlin]

[carlinmidarlin]

To

many pics

[Rossco(Iceman Josros)]

53 minutes ago, carlinmidarlin said:

Groovy 

[Upshotknothole]

Anyone have slingshot 750 braces? 

[Rossco(Iceman Josros)]

19 hours ago, Upshotknothole said:

Anyone have slingshot 750 braces? 

There is a guy on the facefuck slingshit page that sells them 

[carlinmidarlin]

Hiya, I’ve managed to get a set done, I’m just waiting on the fixings to come now,this is how mine look on the bike

[johnnyboy]

I’m up for a set, can you quote a price or want to message me, where are you? 

[Rossco(Iceman Josros)]

22 hours ago, carlinmidarlin said:

Hiya, I’ve managed to get a set done, I’m just waiting on the fixings to come now,this is how mine look on the bike

PM’d ya