Jump to content

Difference between L and R intake rubbers on 82 gsx1100?


gorbys

Recommended Posts

Posted (edited)

I see wemoto is out of the R ones and sets of four sold on Eblag all have the same part number on all fours. So is there any difference? Cant I just flip two of them 180 degrees? 

Edited by gorbys
Posted

Good question, I was wondering the same just yesterday. Originally they are different indeed. But now the parts fisches say that the left one has been superceded by the right one. And when test fitting the old ones to the head I can't see much difference between them if I just flip around the right side one. So I assume it's fine to use the same part number for all.

Posted

Hi

I have taken

No 1 = L

No 2 = L

No 3 = R

No 4 = R

"  Ordnung muss sein "  注文は次の必要があります xD

all with Inscription on the top, may I remember there was also a  marking ,  that this rubbers are in right direction, but I am not sure..

Cheers

Uli

 

Posted

They have a little tit on the carb entrance side to indicate the top of the pipe i believe ?

That then defines whats what as far as left and right.

I would have thought you could flip them over but i have no experience with that point

Posted

I bought a brand new set of rubbers a little while ago and found they did fit on opposite sides pretty well...one thing i did notice though was the rubber started developing fine cracks along the centre which didn't fill me with confidence so I ended up buying some old ones that seemed to have changed from rubber to granite but still look tip top....the new ones I had were genuine Suzuki too!!...and knocking on £90 O.o

Posted

I compared the L and the R yesterday and they both have the same curvature so I can't find any reason it wouldn't work. Yeah I noticed they're about 25€ each so not to happy about that but mine have started to crack on the ends. They're still pliable but yeah. 

Posted

I got a set from Robinsons a few years ago and they said they only had the  lefts or rights can't remember which in stock and they would fit both hands which they did

Posted

Just looked today and all marked R . They don't take long to crack but usually just suffice cracks. But next time off gonna shrink tube them.  Have used cycle tube in the past(y)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...