Pudzrx Posted January 18, 2021 Share Posted January 18, 2021 Anyone know if another models brake pedal is the same fitment /spline size ? I need a steel one not cast ally to modify, please see below. Quote Link to comment
Joseph Posted January 19, 2021 Share Posted January 19, 2021 I've got a steel one for katana i think Quote Link to comment
no class Posted January 19, 2021 Share Posted January 19, 2021 clearance issue ...... try a slabside brake pedal . if the slines are smaller you could cut off the kat spline shaft and weld in a slabby shaft ... then bush the frame mount for the smaller shaft . Quote Link to comment
no class Posted January 19, 2021 Share Posted January 19, 2021 1 hour ago, no class said: clearance issue ...... try a slabside brake pedal . if the slines are smaller you could cut off the kat spline shaft and weld in a slabby shaft ... then bush the frame mount for the smaller shaft . come to think of it.... the early teapots had similar brake pedals to the slabby ... you could check those too as an option . Quote Link to comment
Pudzrx Posted January 19, 2021 Author Share Posted January 19, 2021 Is that 20mm 18 spline ? Been looking at those. If I can get a steel pedal , will just bend a bit of tube and attach to the spline and the pedal. Cheers puddy Quote Link to comment
Pudzrx Posted January 22, 2021 Author Share Posted January 22, 2021 Well would you believe it ? Managed to keep the original pedal with fitting the aftermarket pegs and billet brackets that came with the bike , spaced out from the frame slightly. Adjusted the brake pedal pushrod to get the pedal level , just gotta make the bracket to hold the meg on. Well happy! Puddy Quote Link to comment
Pudzrx Posted January 22, 2021 Author Share Posted January 22, 2021 7 minutes ago, TonyGee said: result Ta , can't wait to ride past some shop windows and admire the loveliness , lol. Puddy 1 Quote Link to comment
TonyGee Posted January 22, 2021 Share Posted January 22, 2021 24 minutes ago, Pudzrx said: Ta , can't wait to ride past some shop windows and admire the loveliness , lol. Puddy thats the way Quote Link to comment
no class Posted January 22, 2021 Share Posted January 22, 2021 3 hours ago, Pudzrx said: Ta , can't wait to ride past some shop windows and admire the loveliness , lol. Puddy ..... a guy I knew once.... rear ended a car doing that 1 Quote Link to comment
Pudzrx Posted January 22, 2021 Author Share Posted January 22, 2021 3 minutes ago, no class said: ..... a guy I knew once.... rear ended a car doing that If you ride a classic Suzuki , then you have either done that , or nearly done that , and you're a liar if you say you haven't, lol. Puddy 1 Quote Link to comment
Captain Chaos Posted January 23, 2021 Share Posted January 23, 2021 8 hours ago, no class said: ..... a guy I knew once.... rear ended a car doing that is that why you wrote "knew" and not "know"? 1 Quote Link to comment
Pudzrx Posted January 23, 2021 Author Share Posted January 23, 2021 Went down and made the bracket this morning , all fits a treat. Puddy Quote Link to comment
no class Posted January 23, 2021 Share Posted January 23, 2021 7 hours ago, Captain Chaos said: is that why you wrote "knew" and not "know"? ....I wrote knew because he turned out to be a fukn' poser.....so I flushed him like a morning terd . Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.