Katana brake pedal

[Pudzrx]

Anyone know if another models brake pedal is the same fitment /spline size ?

I need a steel one not cast ally to modify,  please see below.

[Joseph]

I've got a steel one for katana i think

[no class]

clearance issue ...... try a slabside brake pedal  . if the slines are smaller you could cut off the kat spline shaft and weld in a slabby shaft ... then bush the frame mount for the smaller shaft .

[no class]

1 hour ago, no class said:

clearance issue ...... try a slabside brake pedal  . if the slines are smaller you could cut off the kat spline shaft and weld in a slabby shaft ... then bush the frame mount for the smaller shaft . come to think of it.... the early teapots had similar brake pedals to the slabby ... you could check those too as an option .

 

[no class]

88 teapot pedal

[Pudzrx]

Is that 20mm 18 spline ?

Been looking at those.

If I can get a steel pedal , will just bend a bit of tube and attach to the spline and the pedal.

Cheers puddy 

[Pudzrx]

Well would you believe it ?

Managed to keep the original pedal with fitting the aftermarket pegs and billet brackets that came with the bike , spaced out from the frame slightly. Adjusted the brake pedal pushrod to get the pedal level , just gotta make the bracket to hold the meg on. 

Well happy!

Puddy 

[TonyGee]

result 

[Pudzrx]

7 minutes ago, TonyGee said:

result 

Ta , can't wait to ride past some shop windows and admire the loveliness , lol.

Puddy 

[TonyGee]

24 minutes ago, Pudzrx said:

Ta , can't wait to ride past some shop windows and admire the loveliness , lol.

Puddy 

thats the way  

[no class]

3 hours ago, Pudzrx said:

Ta , can't wait to ride past some shop windows and admire the loveliness , lol.

Puddy 

..... a guy I knew once.... rear ended a car doing that 

[Pudzrx]

3 minutes ago, no class said:

..... a guy I knew once.... rear ended a car doing that 

If you ride a classic Suzuki , then you have either done that , or nearly done that , and you're a liar if you say you haven't,  lol. 

Puddy 

[Captain Chaos]

8 hours ago, no class said:

..... a guy I knew once.... rear ended a car doing that 

is that why you wrote "knew" and not "know"?

[Pudzrx]

Went down and made the bracket this morning , all fits a treat.

Puddy 

[no class]

7 hours ago, Captain Chaos said:

is that why you wrote "knew" and not "know"?

....I wrote knew because he turned out to be a fukn' poser.....so I flushed him like a morning terd .