Jump to content

Bandit 1200 with gsxr carbs need help


Jakedavis

Recommended Posts

Posted (edited)

Hi guys

i have bought a bandit 1200 MK1 that has gsxr 750 carbs (look like 1989 model ones with choke on side). The bike is running very rich black plugs running on tick over, bike will throttle up but cuts out after a while. Looking for advice on jet sizes  it has 37.5 pilot and 102 main running on pods. Changed pilot to 35 and bike has correct mix at tick over but back fires and won’t rev just cuts out. All help accepted don’t have money to get it to a dyno at the moment.The 35 pilot jet I bought has no side holes the 37.5 has 8 would this make a difference

 

Edited by Jakedavis
Posted
2 hours ago, Jakedavis said:

Hi guys

i have bought a bandit 1200 MK1 that has gsxr 750 carbs (look like 1989 model ones with choke on side). The bike is running very rich black plugs running on tick over, bike will throttle up but cuts out after a while. Looking for advice on jet sizes  it has 37.5 pilot and 102 main running on pods. Changed pilot to 35 and bike has correct mix at tick over but back fires and won’t rev just cuts out. All help accepted don’t have money to get it to a dyno at the moment.The 35 pilot jet I bought has no side holes the 37.5 has 8 would this make a difference

 

Hi Jake, RTFR then try some 140 main jets for a good starting point with pod filters. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...