Fastbikes76 Posted June 9, 2019 Posted June 9, 2019 Hi guys, Ive recently bought a 750M to tart up and make nice again. Turns out it was a lot more tired than I bargained on so will end up more of a mini resto than clean up ! I will start a build thread soon but need help on interchangble parts please. Firstly I need the front metal bracket that goes inside the front mud guard, my parts manual doesn't seem to show this available separately. Which other years/models will fit the 750M ? Exhaust, my headers are rotten and the end can buggered too. Which other headers fit, I've heard about perhaps bandit headers fitting or possibly the 1100M system going on but sitting a little lower. I have been offered a End can from an 11M which im hoping will mate up to some 750M headers, any drastically obvious reason they wont mate up ? And finally for now, rear shocks. Im vaguely aware for the pre 2012 1000RR shock and K7 shock fitting. Is the 11M a direct swap into the 750M setup ? Sorry if these have been covered before, I have genuinely scoured through about 50 pages of info on here looking for the right answers, but need clarification on the above. Regards Fb Quote
Fastbikes76 Posted June 9, 2019 Author Posted June 9, 2019 (edited) . Edited June 9, 2019 by Fastbikes76 Quote
dupersunc Posted June 9, 2019 Posted June 9, 2019 Don't bother with the metal bracket on the mudguard. heavy and useless Quote
Fastbikes76 Posted June 9, 2019 Author Posted June 9, 2019 Just now, dupersunc said: Don't bother with the metal bracket on the mudguard. heavy and useless Does it not have the clips that hold the brake hoses incorporated in it ? what do you do with the hoses ? Thanks Fb Quote
Dezza Posted June 11, 2019 Posted June 11, 2019 It's not difficult finding pipes for oil cooled gsxrs, unless you want oem. One thing to bare in mind is the 11/12 engines are taller than the 750s so a pipe made for an 11 or blandit 12 is unlikly to fit well on a 750. Cans are cans.... Personally, I wouldn't bother with any oem pipe as they weigh a ton. Quote
Fastbikes76 Posted June 12, 2019 Author Posted June 12, 2019 On 6/11/2019 at 10:08 AM, Dezza said: It's not difficult finding pipes for oil cooled gsxrs, unless you want oem. One thing to bare in mind is the 11/12 engines are taller than the 750s so a pipe made for an 11 or blandit 12 is unlikly to fit well on a 750. Cans are cans.... Personally, I wouldn't bother with any oem pipe as they weigh a ton. Thanks, I managed to pick up a mint Carbon Yoshi end can and link pipe, so I will probably just get some new stainless headers from Black Widow on fleebay . Quote
Fastbikes76 Posted February 29, 2020 Author Posted February 29, 2020 Still got this going on in the background. Ive sorted the front mudguard bracket and found a delivery miles rear shock which was a bonus !! Im still stuck on exhaust headers though. I still cannot find a definitive answer as to what headers fit a 1991 750M with standard fairings in situ. Cross referencing part numbers seems to indicate the L headers share a part number but cant find any L headers for sale either. Ive had a couple of people mention the GSX750 Inazuma fit ? Does anyone know if either of these exhaust below are a DIRECT bolt on and fit like the original would have ? https://www.Eblag.co.uk/itm/SUZUKI-GSX750-GSX-750-INAZUMA-EXHAUST-PIPES-DOWNPIPES-FRONT-PIPES-HEADERS-98-03/151449797354?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649 https://www.Eblag.co.uk/itm/Suzuki-750-Gsxf-1997-2006-Stainless-Steel-Collector-Delkevic/254281823721?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649 Many thanks Fb Quote
dupersunc Posted February 29, 2020 Posted February 29, 2020 https://www.Eblag.co.uk/itm/SUZUKI-GSXR-750-SLINGSHOT-MICRON-ST-ST-4-2-1-EXHAUST-SYSTEM/362924778367?hash=item548000a37f:g:HnAAAOSwRS9eU865 Quote
Fastbikes76 Posted February 29, 2020 Author Posted February 29, 2020 3 hours ago, dupersunc said: https://www.Eblag.co.uk/itm/SUZUKI-GSXR-750-SLINGSHOT-MICRON-ST-ST-4-2-1-EXHAUST-SYSTEM/362924778367?hash=item548000a37f:g:HnAAAOSwRS9eU865 Thanks, seen that one. Im looking for a new stainless set so trying to find something off another model known to fit the M. Sadly they had new ones available but I wasn't ready for one yet so didn't buy it. They sold out stock and no longer making any more Quote
Crass Posted February 29, 2020 Posted February 29, 2020 That advert looks like Pete Stansfield in Malton. He breaks loads of oil boilers. I had some bits off him when I was restoing my 750L. Nice bloke. Might be worth dropping him a line to see if he has what you're looking for, although a stainless system is surely as good as new, it's not like they rot? You can always swap out the dinged can on that one. 1 Quote
Fastbikes76 Posted March 1, 2020 Author Posted March 1, 2020 11 hours ago, Crass said: That advert looks like Pete Stansfield in Malton. He breaks loads of oil boilers. I had some bits off him when I was restoing my 750L. Nice bloke. Might be worth dropping him a line to see if he has what you're looking for, although a stainless system is surely as good as new, it's not like they rot? You can always swap out the dinged can on that one. Thanks, I will send him a message and see what he has. I have a virtually brand new unmarked Carbon Yoshi to go on but am also keeping an eye out for a mint standard rear silencer. Regards Fb Quote
Jaydee Posted March 1, 2020 Posted March 1, 2020 12 hours ago, Crass said: That advert looks like Pete Stansfield in Malton Think he's a member on here if I'm not mistaken. @1260Pete1 Quote
dupersunc Posted March 1, 2020 Posted March 1, 2020 8 minutes ago, Jaydee said: Think he's a member on here if I'm not mistaken. @1260Pete1 Thats a different Pete that breaks lots of oil boilers Quote
Jaydee Posted March 1, 2020 Posted March 1, 2020 19 minutes ago, dupersunc said: Thats a different Pete that breaks lots of oil boilers My bad. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.