Tony H Posted March 2, 2019 Share Posted March 2, 2019 Folks I had these carbs on a 1982 GSX1100 EZ but don't think they are correct. bore is 36mm. outside diameter of intake is 55. Can you identify them please Quote Link to comment
stockcar Posted March 2, 2019 Share Posted March 2, 2019 EZ would have had 34mm CV carbs as std, they look like the slide carbs fitted to certain earlier GS1000's, etc. Quote Link to comment
bomberone Posted March 3, 2019 Share Posted March 3, 2019 Kat 1000 had 32mm carbs, think the gs1000 were smaller, 28mm i think? Quote Link to comment
stockcar Posted March 3, 2019 Share Posted March 3, 2019 Depend where he measured them Quote Link to comment
gs7_11 Posted March 3, 2019 Share Posted March 3, 2019 Yeah, biggest VMs were 30mm, weren't they? The 30s are the only ones that would straight fit on CV carb rubbers. I think you're measuring the wrong bit. Quote Link to comment
ral Posted March 3, 2019 Share Posted March 3, 2019 Measure inside diameter where carbs push onto rubbers, 28mm GS1000" Quote Link to comment
Captain Chaos Posted March 3, 2019 Share Posted March 3, 2019 42 minutes ago, ral said: Measure inside diameter where carbs push onto rubbers, 28mm GS1000" my GS1000E had 26mm carbs, only S has 28mm IIRC Quote Link to comment
ral Posted March 3, 2019 Share Posted March 3, 2019 1 minute ago, Captain Chaos said: my GS1000E had 26mm carbs, only S has 28mm IIRC Correct, the S has the larger 28s Quote Link to comment
gs7_11 Posted March 3, 2019 Share Posted March 3, 2019 57 minutes ago, Captain Chaos said: my GS1000E had 26mm carbs, only S has 28mm IIRC Not true. Depends on the market 79 Es in some markets, including UK, had 28's. 1 Quote Link to comment
Tony H Posted March 6, 2019 Author Share Posted March 6, 2019 Been away for a while so missed posts. These are 36mm bore, engine side . Excuse tape, shed faries have had it away with vernier Quote Link to comment
Reinhoud Posted March 13, 2019 Share Posted March 13, 2019 On 3/3/2019 at 11:05 AM, bomberone said: Kat 1000 had 32mm carbs, think the gs1000 were smaller, 28mm i think? Even smaller, 26 or 27mm Quote Link to comment
gs7_11 Posted March 13, 2019 Share Posted March 13, 2019 6 hours ago, Reinhoud said: Even smaller, 26 or 27mm No, 28 or 26, depending on model and market. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.