36mm carbs

[Tony H]

Folks

I had these carbs on a 1982 GSX1100 EZ but don't think they are correct. bore is 36mm. outside diameter of intake is 55.

Can you identify them please 

[stockcar]

EZ would have had 34mm CV carbs as std, they look like the slide carbs fitted to certain earlier GS1000's, etc.

[bomberone]

Kat 1000 had 32mm carbs, think the gs1000 were smaller, 28mm i think?

[stockcar]

Depend where he measured them

[gs7_11]

Yeah, biggest VMs were 30mm, weren't they? The 30s are the only ones that would straight fit on CV carb rubbers.

I think you're measuring the wrong bit.

[ral]

Measure inside diameter where carbs push onto rubbers, 28mm GS1000"

[Captain Chaos]

42 minutes ago, ral said:

Measure inside diameter where carbs push onto rubbers, 28mm GS1000"

 my GS1000E had 26mm carbs, only S has 28mm IIRC

[ral]

1 minute ago, Captain Chaos said:

 my GS1000E had 26mm carbs, only S has 28mm IIRC

Correct, the S has the larger 28s 

[gs7_11]

57 minutes ago, Captain Chaos said:

 my GS1000E had 26mm carbs, only S has 28mm IIRC

Not true. Depends on the market 79 Es in some markets, including UK, had 28's.

[Tony H]

Been away for a while so missed posts.

These are 36mm  bore, engine side . Excuse tape, shed faries have had it away with vernier

[gs7_11]

New one on me.....

[Reinhoud]

On 3/3/2019 at 11:05 AM, bomberone said:

Kat 1000 had 32mm carbs, think the gs1000 were smaller, 28mm i think?

Even smaller, 26 or 27mm

[gs7_11]

6 hours ago, Reinhoud said:

Even smaller, 26 or 27mm

No, 28 or 26, depending on model and market.