robbo_64 Posted February 13, 2019 Posted February 13, 2019 (edited) Daft question but does anybody know for definite whether slabby banjo bolts are 10mm x 1mm thread size or 10mm x 1.25mm? Want to order some with a bleed nipple in after the hassle I've had with bleeding mine. Ta Edited February 13, 2019 by robbo_64 Quote
Swiss Toni Posted February 13, 2019 Posted February 13, 2019 (edited) 10 X 1mm Edited February 13, 2019 by Swiss Toni Quote
Dezza Posted February 13, 2019 Posted February 13, 2019 Maybe check with a thread guage as all the Jap banjo threads I have encountered on master cylinders have been 10 x 1.25. 10 x 1 is for European bikes, esepcially those using Brembo brake components. Hold up an M6 fastener to see if the thread pitches are the same. If so, it's a 1mm pitch as 99.99% of 6mm screws and bolts are 1mm pitch. Quote
Swiss Toni Posted February 14, 2019 Posted February 14, 2019 It's definitely 10x1.0mm. Took a banjo bolt out of Slab 750 caliper, and thread gauged it to death! 1 Quote
Dezza Posted February 14, 2019 Posted February 14, 2019 OK, I will measure the threads if I use a stock mc for anything Quote
robbo_64 Posted February 14, 2019 Author Posted February 14, 2019 Thanks gents have ordered 10 x 1. I’ll let you know Quote
wraith Posted February 14, 2019 Posted February 14, 2019 10x1 for suzuki. I think some other jap bike makers use 10x1.25 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.