carlinmidarlin

Hi all , could I use a 1200 bandit rear disc on my gsxr 750 rear wheel , both are 5 bolt and 5.5" wide cheers mick

Sorry it's a std system with a slip on end can

Well that weren't to bad as me airbox was split in half cheers captain for the heads up , now do I plastic weld up the airbox or use a stage 3 dynojet kit and Ryanair filters as the bike has a full micron system

Anyone else tryed this way as I'm gonna start it in 10 mins

Right , sorry it's been a long time since I've touched this bike again , I took the bike to a mate for a mot and to see if he could sonic the carbs to clean them , but he's rung me to say the air box has a big crack half way through , so do I drop the engine and fit a newish air box or dynojet with filters , please help as the suns out now cheers mick

Hi , I'm up for going watching for the weekend but what's the deal with camping , we're can I book to camp with a weekend pass to stop on site cheers mick

As far as I no it's all std 1200 bandit

Just took the plugs out the bike and all 4 brand new are like this after a 40 mile ride out , as before it runs abit fluffy at tick over but under load it's great apart from when you pull up to traffic lights and it cuts out , could it just be the mixture running rich

Ive used por15 on a few tanks now and had no bother so far

I'm deffo on this , a full weekend of bikes n booze , were do I sign on the dotted line

Sorted now thanks , not often I say this but God bless that bidding site

Nice collection there fella

Need 1 like this asap if anyone's got 1

Love it mate

Easy goes with the sealer then

Cheers I'll have a look now mate

What's the best gasket sealer to use on engine casings

Cheers all sorted now

God I love slabies but there out of my price range now so the 7/12 is a keeper for now

I've done mine in 2k and it's been great , as said etch primer is a must plus good prep

I'm going to Stafford this weekend like I've done for the last 8 yrs or so , I'll pick the plugs and spanner up there I hope cheers mick

What the best plugs to run on my 7/12 bandit engined bike there so many on that site , are JR9B the right ones and what size plug spanner ?? I've not got 1 but some say 16 MM. and some 18 MM cheers mick

He's some pics of the pic ups and plug

I've got a 12 bandit cdi , so it's just the pick ups i need , we're the best place to look