McLean Racing

0.5mm iirc

1052 rods are 0.5mm longer

Not personally mate im affraid

them specs sound like Kent suz7 street cams? Had a set of them in my old mans old motor i built, picked it up a little mainly noticable in the midrange untill i tweaked the cam timing a bit

It should give it a bit more power in the top end and midrange depending on how u time them in

Duration is around 235 degrees and i think the lift is about 9mm on inlet and 8.7mm on exhaust iirc.

Defo. APE studs and torque it down to 42ft/lb. Then enjoy some trouble free riding Never had a MLS gasket let go even with high comp and 100+hp nitrous

MLS shouldnt have let go at that, what was the head torqued down to?

That'll be why 90% of the record holding bikes use the NX solinoids then?

Buy a big bloody nitrous kit instead lol https://www.dropbox.com/s/yok0yoz4zgonn68/2015-07-31 15.18.28.jpg?dl=0 https://www.dropbox.com/s/mjir7m2t4ldzjgv/2015-08-05 11.18.54.jpg?dl=0

Nice. Oil cooled engine? How quick?

MPM semi 10w40 or 5w50 synthetic if racing

Correct Clive. New gears from Suzuki are undercut from the factory

Very tidy bike dude

what i meant was. I know of people who have stroked gsxr cranks by moving the journals and welding them up and they havent been as stong as the stock crank. Hence why i said it would only be worth doing on a press together crank like a gsx. But as you said. Even then it may not work for the effort involved. The stock cranks can take alot of power. Ive put approx 300hp on mine no probs and i plan to go more. There was someone in the US who made just over 500hp on a stock crank. Is reworking the crank worth the effort? Id personally say it isnt

Dont realy need em. I got logging to prove it

Its known that the weld up gsxr cranks dont like going much past 180hp. U could build a plain bearing crank up similar to how the gsx cranks are made. Would be a better solution in my eyes

Ran buttons in mine for years with no real issues.

150-155 usually more than sufficient

because the run off is a half mile long so u dont realy need that much brake to slow down. I only start braking half way down lol

Dont realy know at the minute. Theres 2 factors, the major one is money, the second is time. I dont have the funds to race now the missus is on maternity leave, so it could be 2017 before i race a full season again. Baring this in mind, im not too worried about sorting the bike just yet so concentrating all my efforts into the new Outlaw build which is taking up alot of my time. As long as we have at least 1 bike out on track to represent the team then thats all we are worried about. Ady's doing a great job in 9.50 bike and is sitting 3rd in the championship with 2 rounds to go so with a big team effort, we mite even sneak a big trophy at the end of the year

im sure many have seen the bikes before but heres a few of our current race bikes. The slabby has been sold now tho and im not allowed to mention the other but here we go GSXR 1100M Nitrous, GSXR1100G Nitrous, GS1100R pics by (in no particular order) McLean Racing, Dave Manning, Mark Skinner, James Forster, Wayne Turner, Facebook

120+ shot of nitrous

Enough to easily run 8.9s motor only and 8.3s probably 210-220bhp. Should have close to 300hp this year