HWB

Awesome! So whats my best bet ? The 89 1100 cams or 86 1100 cams (can buy them tomorrow) or 86 750 cams ?!

I know mate and i appreciate you and everyone taking the time to help me out cheers

Wraith said theyr soft, and i got it you wanted the 1127 89 cams since theyr better ? now its the dot cams ? Sorry guys im in uncharted territories here with the dot thing, the head is going to get ported and the cams dialled, i just mean which profile has the best lift and duration for my application seeing ita going on a ported head. Looking for torqy midrange

Im confused

Dot cams from gsxr 748

:') gotcha

Ok then time to buy an sv 650 switch 2003-2006 works ?

Yes i have a parking light but i dont really mind not using it i can always rewire it with the headlights no problem i just need a housing that works, ill try to find the dr600 switch but as u said i think thats a long shot, any other recommendations? What are people running with the flatties ?

I recently obtained a 748 *dot*head to replace my 1127 N shim style head, i have at my disposal 1127 N cams, 1127 rocker style cams(89-90) and pristine condition 748 cams (*dot*head). Im unsure at this point what gives me the best performance out of this build any help would be appreciated i understand some cam sprockets need to be swapped ? also what compression ratio am i looking at ? Cheers

How do you guys maintain the killswitch/lightswitch housing while running your push pull system ? Mine wont fit. Any 1st gen replacement or something ? Im using the motion pro kit cheers

Can anyone shine in please ?

Jaydee quick question, when refilling the body does the ifp need to be seated all the way at the bottom of the reservoir ? Also should it have a slight pressure to make bleeding quicker ? Any tips from anyone knowledgeable please ? Need to know the final steps

Thanks for the link i saw his work, looks like there not very good, the oem decals start blue and end purple, they are faded, this dude just printed them blue.. anyone else ?

Im interested in the decals for the 92 the blue and white verion of the N model. Anyone know if there is someone who makes these ?

Did you try putting the clip 2nd feom the bottom ? Makes it richer at 7k rpm.. worth a try ?

Can you post a pic of the whole bike with the exhaust showing ? Im sure lots of guys here can identify what you have

If its touching the fairings then its either not for that bike or bad quality exhaust. You can also bend it to shape. Some guys get late model exhausts and bend them to fit so..

You can wrap it mate,

I was actually referring to the nut thats inside the cylinder, the one that holds the piston and shims

That great man ive been searching online for a manual but nothing... thanks alot

Hey Jaydee any idea of the torque spec for the shaft nut ?

Will do that mate thanks

And i dumped the old fuel from.the tank and filled with new fuel

But i cleaned them thoroughly and blew them with pressure, boiled the jets, fine wire inside to unclog (nothing was clogged but did it anyways) cleaned again and blew them.

I recently bench synced them. If i rev the bike for a couple of minutes the temps dont go up, only 3 and 4 go up. Does that rule out syncing ?