Fazz711
-
Posts
1,576 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Fazz711
-
-
Which gsxr 750?
Some are long stroke some short stroke.
If long stroke may get away with using short stroke std ign.
Think 750j has limit at 13500
-
6 hours ago, dupersunc said:
Nope. It's because of the hydrogen embrittlement issues mentioned earlier.
Chrome plating is banned in motorsport because of this.
I wasn't disagreeing with you should have said that but it also cracks due to flex so another reason it's not suitable
-
Forgot to add.
A mate had a swingarm off a quad powder coated with a chrome effect powder coat and it looks grear
-
I think chrome may also crack on a frame due to flex.
Think this is why Harris, moto Martin and rickman used nicol as it tolerates flex
-
Any later four pots with adapter plates is a very good improvement
-
Hi bud.
Welcome to OSS
-
More pictures
-
Finally found them.
Sorry for the delay.
Mine don't have the link pipes so may not be the same.
-
Nice.
Can't wait for more on this.
-
On 6/26/2021 at 4:51 PM, Fifer said:
Would you be able to take a photo of your Micron to let me compare them ?
Will have a look for them tomorrow.
Not sure where I have put them lol.
-
1
-
-
They look like a set of micron pipes I have on a 7/11
-
Going to be a stunner when it's done.
-
Nice project
-
Hi bud welcome to OSS.
Nice project.
There are some kits about that put it into 1100 frame.
750 has different bottom mount so is possible to do.
Choice is usually sit forward in the frame to get exhaust on or sit back for better chain run.
Somewhere in the middle compramises both lol.
Bush is easier bore out more difficult but more strength.
-
1
-
-
Superb craftmenship
-
1
-
-
Looking very nice so far.
Nice craftmenship.
Looking forward to see how it looks when finished.
-
Nice work.
Looks very neat.
-
Hi bud.
Welcome to OSS
-
Try taking the high spots off before lapping.
Looks pretty bad though.
Don't think metal spray will up to it but spiral welding will do it.
Not a cheap job though.
-
Just put little stickers on your speedo. Lol
-
1
-
-
Some markets had CV carbs.
Think the yanks had CV maybe others to.
-
Ditch the shit magnet
-
750 frames are cheaper and come up more often.
If your doing the brace thing and putting modified front and rear not much of a problem.
-
As far as I know only the bottom engine mount is different position.
GSXR place of original registration question
in Oil Cooled
Posted · Edited by Fazz711
Spelling lol
Have the clocks got fuel guage?
Think the Jap home market ones had file guage.