Mariobasso Posted April 15, 2018 Share Posted April 15, 2018 Hi all... new here. Modified my b12 and currently working on a gsx750es plan is to swap the engine (750gixer) wheels fork and swingarm. got the k1 swingarm in but i’d like to know if anyone ever did this conversion and if i could have a look at the linksystem just to be shure i’m doing this correctly. many thanks Quote Link to comment
wraith Posted April 15, 2018 Share Posted April 15, 2018 Welcome to OSS, Try looking at the project pages Ps we all like pics on here Quote Link to comment
Swirl Posted April 15, 2018 Share Posted April 15, 2018 Wraith is right no pics it hasn't happened, anyway welcome and where's the pics 3 Quote Link to comment
Swiss Toni Posted April 16, 2018 Share Posted April 16, 2018 Welcome to OSS, Mario. And ... where's those pictures??? 1 Quote Link to comment
Mariobasso Posted April 16, 2018 Author Share Posted April 16, 2018 (edited) Tnx all. Edited April 16, 2018 by Mariobasso Quote Link to comment
Mariobasso Posted April 16, 2018 Author Share Posted April 16, 2018 Ah got it lol swingarm still has to come down. I got the linksytem this far. Be welding new shock mounts. 1 Quote Link to comment
Mariobasso Posted April 16, 2018 Author Share Posted April 16, 2018 And this is my b12 btw 3 Quote Link to comment
Swirl Posted April 16, 2018 Share Posted April 16, 2018 Swinger in the es looking good, Quote Link to comment
Swirl Posted April 17, 2018 Share Posted April 17, 2018 8 hours ago, Mariobasso said: I've got this to do with a 1999 srad arm and slingshot front end, any pics and advice will be appreciated Quote Link to comment
Mariobasso Posted April 18, 2018 Author Share Posted April 18, 2018 On 16-4-2018 at 11:50 PM, Swirl said: Swinger in the es looking good, Tnx m8 Quote Link to comment
Mariobasso Posted April 19, 2018 Author Share Posted April 19, 2018 On 17-4-2018 at 7:54 AM, Swirl said: I've got this to do with a 1999 srad arm and slingshot front end, any pics and advice will be appreciated Swinger i’m still looking in to..got a mate with a k1 so will be getting some mesurements from him. Will post it here. Front end i took the original stem from the ES and asked the metal shop to fit it in to the busa yoke. they had to make a spacer and then pressed it in. Since the ES stem is originaly welded. To secure it i drilled a 6 mm treaded hole on the back of the bottom yoke through the stem and scewed a M6 bold in...just to be shure 1 Quote Link to comment
Mariobasso Posted June 18, 2018 Author Share Posted June 18, 2018 Got the linkage the right way now. Rebuilt the mounts and using a Bking shocker. These dogbones are temporary.the are just for the mock up . When the lump is in i wil” change them Quote Link to comment
SiBag Posted June 18, 2018 Share Posted June 18, 2018 Nice work, looking good so far. Oh and welcome to OSS. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.