Blue Posted June 22, 2017 Share Posted June 22, 2017 What size sleeve do I need on a 1127 engine for the lower rear engine mount when fitting into 750 frame? Is it 12mm tube by 1mm wall? Thanks Quote Link to comment
Swiss Toni Posted June 22, 2017 Share Posted June 22, 2017 (edited) Think so. The 750 bottom bolt is 10mm. Or...take the frame mounting holes out to 12mm? Edited June 22, 2017 by Swiss Toni Quote Link to comment
fatblokeonbandit Posted June 22, 2017 Share Posted June 22, 2017 I drilled the frame to suit the 12 mm engine mount. Quote Link to comment
bluedog59 Posted June 22, 2017 Share Posted June 22, 2017 I'd go with the M12 and drill the holes out. Suzuki don't put the bigger bolt in for nothing. 1 Quote Link to comment
Banditmac Posted June 23, 2017 Share Posted June 23, 2017 Does this not have to be done on the middle mountings aswell? Quote Link to comment
SiBag Posted June 23, 2017 Share Posted June 23, 2017 I just used some 12mm dia, 1mm wall ally tube and used M10 mounting bolt. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.