dupersunc Posted April 10, 2023 Author Share Posted April 10, 2023 (edited) Was going to fit and time the cams today, but the sun came out so I went to the pub instead. Edited April 10, 2023 by dupersunc 1 Quote Link to comment
DAZ Posted April 10, 2023 Share Posted April 10, 2023 (edited) 39 minutes ago, dupersunc said: Was going to fit and time the cams today, but the sun came out so I went to the pub instead. Not a total loss then I got dragged to b&q.....at least it was raining outside Edited April 10, 2023 by DAZ Addition 1 Quote Link to comment
KATANAMANGLER Posted April 11, 2023 Share Posted April 11, 2023 On 4/10/2023 at 5:23 PM, dupersunc said: Was going to fit and time the cams today, but the sun came out so I went to the pub instead. Sometimes the pub is the best plan. 1 Quote Link to comment
Rossco(Iceman Josros) Posted April 29, 2023 Share Posted April 29, 2023 On 12/29/2019 at 12:04 PM, dupersunc said: So firstly I decided the bare metal frame wasn't going to work, it was going rusty sat in a warm dry workshop despite coating it with wd40. So the frame has been powdercoated Dorset racing grey. Also had @Gsxrsammachine up some billet engine mounts for me, and I've had some oil cooler mounts water jet cut too. Spent the last week or so building a new engine based on a cheap bandit 1200 that had been dismantled by a monkey and thrown in a crate. I've repaired and painted the cases, replaced all the crank bearings, seals and gaskets and cam chain, it will be topped of with an 81mm Wiseco kit, an Upperton big valve head an Kent suz1 cams. Should be ready to go in the frame next week. Need some oil drain tubes before I can build the top end up. currently fabricating some alloy versions. Would you fancy making some more of the ally oil tubes ?? @dupersunc Quote Link to comment
dupersunc Posted April 29, 2023 Author Share Posted April 29, 2023 4 hours ago, Rossco(Iceman Josros) said: Would you fancy making some more of the ally oil tubes ?? @dupersunc Not in a position to do so at the moment. Sorry. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.