kermit Posted June 23, 2018 Posted June 23, 2018 I have a gsx1100 motor and a gsxr1100w frame... Anybody knows if it fit.... Quote
Swirl Posted June 23, 2018 Posted June 23, 2018 One way to find out, lay the motor on its side and place the frame over it Quote
kermit Posted June 23, 2018 Author Posted June 23, 2018 I know but I can't get to the motor for a while so just thought maybe some one had tried it before.... Quote
Duckndive Posted June 23, 2018 Posted June 23, 2018 Not without major Surgery Stick an Oil Boiler in it Quote
Fjbj40 Posted June 23, 2018 Posted June 23, 2018 Here is a GS 1000 stuffed into a gsxr1100 https://www.thegsresources.com/_forum/showthread.php?229202-GS-1000-engine-in-GSXR-1100-first-gen-frame&highlight= Quote
dupersunc Posted June 23, 2018 Posted June 23, 2018 1 hour ago, Fjbj40 said: Here is a GS 1000 stuffed into a gsxr1100 https://www.thegsresources.com/_forum/showthread.php?229202-GS-1000-engine-in-GSXR-1100-first-gen-frame&highlight= That thing is all sorts of wrong. urrrghhh. I have seen a gsx in slabbie frame, it was only lightly modified, and I think the back of the cases were ground down a bit, to get it in. It may have been a 750 frame, as they're a bit longer in the engine bay believe it or not. Either way the W frames are shorter still, so you won't fit the gsx motor with out doing something ugly. Quote
kermit Posted June 23, 2018 Author Posted June 23, 2018 Okay.... that's probably why I couldn't find anyone who have done it.... Quote
Duckndive Posted June 23, 2018 Posted June 23, 2018 18 minutes ago, dupersunc said: That thing is all sorts of wrong. urrrghhh. I have seen a gsx in slabbie frame, it was only lightly modified, and I think the back of the cases were ground down a bit, to get it in. It may have been a 750 frame, as they're a bit longer in the engine bay believe it or not. Either way the W frames are shorter still, so you won't fit the gsx motor with out doing something ugly. Mark Watkins "there's that name again " Put a GSX Motor in a slabbie frame many moons ago for drag racing...It was for sale again recently but it has an Oil Boiler back in it now.... Quote
Rene EFE Posted June 23, 2018 Posted June 23, 2018 2 hours ago, kermit said: Okay.... that's probably why I couldn't find anyone who have done it.... All the more reason to get on with the job Quote
kermit Posted June 24, 2018 Author Posted June 24, 2018 (edited) Probably wilI go on with the job.... but it will be a winter project... so will return with some info when I found out... Edited June 24, 2018 by kermit Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.