bondyrs250 Posted February 14, 2018 Share Posted February 14, 2018 Building this for a mate. Will be ready for the track days at endurance legends. 1 Quote Link to comment
baldrick Posted February 14, 2018 Share Posted February 14, 2018 trick dry clutch SP version, lovely. Nice black slabby too I can almost smell it from here, Castrol R What are you doing to it? Quote Link to comment
bondyrs250 Posted February 14, 2018 Author Share Posted February 14, 2018 13 minutes ago, baldrick said: trick dry clutch SP version, lovely. Nice black slabby too I can almost smell it from here, Castrol R What are you doing to it? Just giving it a recommission. Forks seals and shock change. General tidy up . Engines fresh rebuild so should be a corker 1 Quote Link to comment
Madb Posted February 14, 2018 Share Posted February 14, 2018 lush!!! ring a ding ding fun. 1 Quote Link to comment
bluedog59 Posted February 14, 2018 Share Posted February 14, 2018 (edited) 3 hours ago, baldrick said: tI can almost smell it from here, Castrol R Or Castrol A747. Edited February 14, 2018 by bluedog59 1 Quote Link to comment
busa1300 Posted February 18, 2018 Share Posted February 18, 2018 Those clutches are getting harder to pay for as all stroker prices have gone through the roof. Is it just the dry clutch with close ratio trans, or do you have the straight plug SP heads and cylinders too. I need to get back out in the shed and swap out the old powervalves in my VJ22FL for a better set out of a RS250... I love my RGV's, good luck with your project 1 Quote Link to comment
bondyrs250 Posted February 26, 2018 Author Share Posted February 26, 2018 On 18/02/2018 at 1:20 AM, busa1300 said: Those clutches are getting harder to pay for as all stroker prices have gone through the roof. Is it just the dry clutch with close ratio trans, or do you have the straight plug SP heads and cylinders too. I need to get back out in the shed and swap out the old powervalves in my VJ22FL for a better set out of a RS250... I love my RGV's, good luck with your project It's got the close ratio gearbox straight cut primary. 300 cylinders Stan stephens tuned. Modified heads not straight plug.good for over 70bhp Quote Link to comment
bondyrs250 Posted February 26, 2018 Author Share Posted February 26, 2018 Just waiting for a new loom so giving it a good clean Quote Link to comment
Hutch Posted February 28, 2018 Share Posted February 28, 2018 What sort of tune did Stan do on the barrels? 1 Quote Link to comment
bondyrs250 Posted March 22, 2018 Author Share Posted March 22, 2018 Just a stage 3 tune with his 300 conversation Quote Link to comment
bondyrs250 Posted March 22, 2018 Author Share Posted March 22, 2018 Just messing Quote Link to comment
Madb Posted March 23, 2018 Share Posted March 23, 2018 err, nope. not feeling that rear seat/unit. fits nicely tho. 1 Quote Link to comment
bluedog59 Posted March 23, 2018 Share Posted March 23, 2018 Take it off this instant ! 3 Quote Link to comment
Blubber Posted March 24, 2018 Share Posted March 24, 2018 That must be a April fools wind up. 1 Quote Link to comment
bondyrs250 Posted March 24, 2018 Author Share Posted March 24, 2018 Don't worry it's for my kat rgv has standard bodywork going on Quote Link to comment
bondyrs250 Posted June 12, 2018 Author Share Posted June 12, 2018 Finally have it running now sounds ace 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.