B12 gear box in GSX1100F ?

[wraith]

Dose anybody know if a b12 gear box will go into a gsx1100f power screen crank cases?

Thanks.

[colinworth79]

I've put a bandit box in 1127 cases . Gearbox output bearing needed changing.

[wraith]

1 hour ago, colinworth79 said:

I've put a bandit box in 1127 cases . Gearbox output bearing needed changing.

Cheers,

I take it you put the 1127 output bearing on the b12 box?

[colinworth79]

5 hours ago, wraith said:

Cheers,

I take it you put the 1127 output bearing on the b12 box?

yes its a narrower bearing

[wraith]

[dupersunc]

One other thing is the shaft on the bandit gearbox where the clutch attaches is shorter. You may have to use a bandit clutch.

[antoniomota]

5 hours ago, dupersunc said:

One other thing is the shaft on the bandit gearbox where the clutch attaches is shorter. You may have to use a bandit clutch.

But the GSX1100F crankshaft has helical cut gear, so not possible to use it with bandit clutch, right?... or am I missing something...? it happens a lot...

-Antonio

[Duckndive]

38 minutes ago, antoniomota said:

But the GSX1100F crankshaft has helical cut gear, so not possible to use it with bandit clutch, right?... or am I missing something...? it happens a lot...

-Antonio

you just need to machine the hub a little so the nut and washer fit ok.....

yes the F has a helical gear

or swop all the blandit gears to the F shafts

[wraith]

OK, this is getting into more work than I was thinking, so I will go back to plan one 

[cullinoc]

Wrath I have a excellent condition powerscreen gear box could do u a swap if bandit 1200 one is in excellent condition also