SlantzGS650 Posted January 6, 2018 Posted January 6, 2018 Hi guys, maybe it’s because I’m used to modern bikes but the clutch on my gs650 feels way to heavy & hard to pull. Is there anything can be done to lighten the lever? I’ve a feeling the clutch is slipping under hard acceleration maybe that’s not helping things. Quote
johnr Posted January 6, 2018 Posted January 6, 2018 lube or replace the cable, check that the lever pivots freely on the bar mount, then make sure that the lever on the clutch cover is at the right angle for correct operation. Quote
wraith Posted January 6, 2018 Posted January 6, 2018 As said try the cable first, or if the clutch is starting to slip, has the last owner put HD clutch springs in? Quote
Fazz711 Posted January 7, 2018 Posted January 7, 2018 Clutch cable routing can cause problems also. Quote
SlantzGS650 Posted January 7, 2018 Author Posted January 7, 2018 (edited) I had a look this morning, the cable seems to come out from the clutch at an angle towards the back of the bike then loops forward up under the tank on the right side. If i worked the cable to come straight out across the back of the engine then up the left side of the bike maybe that would make for an easier pull? Edited January 7, 2018 by SlantzGS650 Quote
johnr Posted January 7, 2018 Posted January 7, 2018 disconnect both ends of the cable and see how freely it slides in and out. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.