DaveJarvE Posted May 14, 2017 Posted May 14, 2017 Hi all ...still not sorted my misfiring engine yet after fitting dyna coils but now i have another problem......how the feck do you mount them. wont fit in the normal place ...used brackets to fit but cant get tank on now ...any ideas ..?...pics..? ...cheers Quote
Simbec1863 Posted May 14, 2017 Posted May 14, 2017 (edited) Depends which Dyna coils and bike you have,this is the fitment on my slabbie,these are Dyna mini series coils Edited May 14, 2017 by Simbec1863 Quote
DaveJarvE Posted May 14, 2017 Author Posted May 14, 2017 wish id have bought those instead ....mine a the green bigger type.... Quote
DaveJarvE Posted May 14, 2017 Author Posted May 14, 2017 Forgot to add its a gsx1100 ez.....very tight area to fit coils in.... Quote
KATANAMANGLER Posted May 14, 2017 Posted May 14, 2017 I mounted mine side ways with the leads facing out I made a bracket and hung it from the existing mounts. Can't find any pics. Quote
Simbec1863 Posted May 14, 2017 Posted May 14, 2017 I've got the green ones on my ET and mounted them as @KATANAMANGLER said but also don't have any pics Quote
Sheep Posted May 14, 2017 Posted May 14, 2017 I welded small threaded bosses on under the top tube just above the rocker cover. This pic shows before the rebuild. Quote
Reelinfeele Posted May 14, 2017 Posted May 14, 2017 Mine are on spacers that raise them up away from the engine using the stock mounting point. Some grinding is necessary for plug wires to fit. Quote
Reinhoud Posted May 16, 2017 Posted May 16, 2017 i've got 4 coils on my GS1000, the orange/brown ones, as far as I know they're the same size as the green ones. Mine fittet on the stock brackets. The other 2 I made behind the battery. Quote
Gixer1460 Posted May 16, 2017 Posted May 16, 2017 Surprised your ignition is still functional! Dyna Orange coils are 1.5 ohm each so they are wired in series i'm guessing - lower volts but 3.0 ohm total resistance? Quote
Reinhoud Posted May 19, 2017 Posted May 19, 2017 On 16/05/2017 at 10:34 PM, Gixer1460 said: Surprised your ignition is still functional! Dyna Orange coils are 1.5 ohm each so they are wired in series i'm guessing - lower volts but 3.0 ohm total resistance? Twin spark. You're on the money, wired in series. Quote
1260EF Posted May 20, 2017 Posted May 20, 2017 On 14/05/2017 at 2:30 PM, DaveJarvE said: Hi all ...still not sorted my misfiring engine yet after fitting dyna coils but now i have another problem......how the feck do you mount them. wont fit in the normal place ...used brackets to fit but cant get tank on now ...any ideas ..?...pics..? ...cheers Cable ties do the job- if a little agricultural (was a temporary thing when I fitted mine about 15yrs ago) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.