ChaosCycles Posted February 28, 2017 Share Posted February 28, 2017 Well then guys here goes. Names Luke and I and I'm located in Sunny England, bought a GS550 chop project in October only to lose my job in November due to company going under, last in, first out... Anyway this hasn't stopped the project just set the final goal a bit further away. And done on a much stricter budget. Cleaning up parts, rather than replacing, and other bits as such... This is the project as she stands at the moment. Hopefully I can get some advice and some help from the biking community. And a Thank You to anyone who has read this and taken the time to do so... Regards Luke. Here for the journey ahead. 7 Quote Link to comment
Swiss Toni Posted February 28, 2017 Share Posted February 28, 2017 Hi Luke, and welcome to OSS! Sorry about the job loss, but that appears to be the way of the world at the minute! Chin up, something will turn up, when you least expect it. Been in the same boat many times! 2 Quote Link to comment
gsx Posted February 28, 2017 Share Posted February 28, 2017 Skinny wheels rock, and welcome Quote Link to comment
wraith Posted March 1, 2017 Share Posted March 1, 2017 Welcome to OSS, hope you can get a new job to help with the project, which looks like you have there. Quote Link to comment
Blubber Posted March 7, 2017 Share Posted March 7, 2017 Hi, i think your front wheel bearings are foocked Quote Link to comment
ChaosCycles Posted March 7, 2017 Author Share Posted March 7, 2017 1 hour ago, Blubber said: Hi, i think your front wheel bearings are foocked Haha if only, no I forgot one of the spacers, but it also appears after a long time looking, I'm missing the front axle nut too... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.