Jdeac1981 Posted January 2, 2017 Posted January 2, 2017 Hi all. I remember seeing somewhere about fitting cbr 600 wheels on to slingys. Had a search but nothing. Anyone point me in the right directionow. Cheers jon Quote
gsx Posted January 3, 2017 Posted January 3, 2017 Few years back was a Phillip island katana running cbr rolling stock front and rear so applicable to a slingy, can't help any more but someone should know Quote
Jdeac1981 Posted January 3, 2017 Author Posted January 3, 2017 I'm sure I've seen a write up on it. Might have been the old site. It was a while back 1 Quote
Captain Chaos Posted January 3, 2017 Posted January 3, 2017 Mr7/11's Slabby had CBR wheels. By now the bike might or might not exist, it was last seen in the UK. Quote
Jdeac1981 Posted January 5, 2017 Author Posted January 5, 2017 Yup. Now I need to find out how the rear works in a slingy swinger. Quote
Swirl Posted January 5, 2017 Posted January 5, 2017 I've got a set in me lock up with discs and cush drive Quote
Phil_R Posted January 6, 2017 Posted January 6, 2017 I have found a copy of the article and converted to pdf https://1drv.ms/b/s!AsHi-ah5pbu-hHaQ8gpsUSM5jNEa, it was a full cbr 600 front end, it mentions the discs being smaller but the F3 models had 296mm discs. You can still read most of the old site on some archive websites 1 Quote
Jdeac1981 Posted January 6, 2017 Author Posted January 6, 2017 What are people's thoughts on this same setup working on a 750 w top braced swinger in an oil cooled 750. I've read the article above. But is the slabbie swinger different to the slingy swinger. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.