SFC Posted November 3, 2016 Posted November 3, 2016 INFO NEEDED does anyone know of a big tubed bob moss frame that originally held a fireblade motor, ive been told bob was either a frame builder or racer who came from scotland, story is there was three frames built , two destroyed and i have only one left ,think bike was published many years ago... any info/help would be greatfully appreciated Quote
melkweg Posted November 4, 2016 Posted November 4, 2016 Was a guy on old site who owned one of his zed styled gsxr engined frames. Can't remember his name though. was it you? Or is this your bike? 1 Quote
Neill666 Posted November 4, 2016 Posted November 4, 2016 Bob is local to me and works with vans now only has his Gsxr engined Kawasuki as his personal bike , I know he built frames for the Gsxr engine and only 5 as far as I know there are still 2 at least in Tayside one is a race bike owned by Torquil Patterson (got a wee bit bent on the track but repaired now) 1 Quote
SFC Posted November 4, 2016 Author Posted November 4, 2016 same frame as above , no it was not me but maybe the guy i have just bought it off , luckily i have since got in contact with bob and he will help with any info i need , been after this frame for many years and now have one, will keep you all updated on progress , many thanks for all your help , cheers carl 1 Quote
busa ash Posted November 9, 2016 Posted November 9, 2016 well you finally got it sfc , years we have spoken about that frame griff finally sold you it . Quote
SFC Posted November 12, 2016 Author Posted November 12, 2016 On 09/11/2016 at 8:38 AM, busa ash said: well you finally got it sfc , years we have spoken about that frame griff finally sold you it . yes he finally caved in, going to need a couple of alterations but easily doable 1 Quote
busa ash Posted November 12, 2016 Posted November 12, 2016 glad you got it it mate , hope too see you progress on here 1 Quote
SFC Posted November 5, 2017 Author Posted November 5, 2017 its almost 12 months since i got frame and not updated anything , time fly's , had to grind off shock mounts as they looked weak and made some new chunky ones Quote
SFC Posted November 5, 2017 Author Posted November 5, 2017 started to polish the worst off the frame, made a new seat unit and modded the tank to suit, engine ready for paint 1 Quote
SFC Posted May 3, 2018 Author Posted May 3, 2018 wiring well uderway , dyna 2000 , new switches and M - unit blue 1 Quote
SFC Posted May 3, 2018 Author Posted May 3, 2018 not my strong point and avoided this wiring like the plague but must crack on....rear light turns off on high beam and struggling to wire in nos controller but getting there , then i can start tidying it up a bit 1 Quote
Blubber Posted May 3, 2018 Posted May 3, 2018 it will all be worth it.. in the end looks like a decent base to work on 1 Quote
SFC Posted May 4, 2018 Author Posted May 4, 2018 feck me ,, now i got one of those parasitic draws , got to recharge battery before i can investigate Quote
SFC Posted July 11, 2019 Author Posted July 11, 2019 got the paint done and she passed the mot with headlight advisory, sorted the slipping clutch , i think , will find out later and have a small flat spot low revs to sort and its finished.....for now 4 Quote
busa ash Posted August 7, 2019 Posted August 7, 2019 Well done carl , glad too see your back on it and mot d 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.