FJD Posted June 21, 2016 Author Posted June 21, 2016 then discovered very weak front brakes, i took off calipers, also water inside underneath the rubber dust covers, cleaned up the pads (they were smeared with copper grease, and also protection oil), we´ll see if the braking gets better. had to fit a helicoil M10X1.25 in one of the threads, because it was stripped (or i did it). alos polished the wheel edges by hand, to make them more shiny again. Quote
strima Posted June 21, 2016 Posted June 21, 2016 Personally I'd strip and clean the brakes just to be sure, also replace those rubber hoses. Cracking looking bike though!!! Quote
Bigkenxx Posted June 21, 2016 Posted June 21, 2016 You've done a good there fella and the bike looks spot on Quote
Captain Chaos Posted June 21, 2016 Posted June 21, 2016 5 hours ago, FJD said: then discovered very weak front brakes, perfectly normal GS1000 brakes then. 1 Quote
gshub Posted June 21, 2016 Posted June 21, 2016 Fitted GSx1100 et discs callipers to mine HEL hoses Et master cylinder as well to my Gs awfull lot better brakes know... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.