Radds Posted May 16, 2016 Posted May 16, 2016 Can anyone tell me the difference between a Slingshot 750 and 1100 frame? Is the steering geometry different etc? Cheers Quote
caferacerdan Posted May 18, 2016 Posted May 18, 2016 I believe the earlier 'K' slingshot frames were lighter, the 750 has a shorter wheelbase too. the later M and N model frames I believe were a bit heavier Quote
Ben Slabby Posted May 18, 2016 Posted May 18, 2016 Afaik, the M/N were both the same, 750 and 1100. Quote
Radds Posted May 18, 2016 Author Posted May 18, 2016 2 hours ago, caferacerdan said: I believe the earlier 'K' slingshot frames were lighter, the 750 has a shorter wheelbase too. the later M and N model frames I believe were a bit heavier The shorter wheel base was due to the swing arm, yes? Quote
caferacerdan Posted May 19, 2016 Posted May 19, 2016 52 minutes ago, Radds said: The shorter wheel base was due to the swing arm, yes? yer, think it was around 2 inches shorter Quote
crashtester Posted May 19, 2016 Posted May 19, 2016 (edited) The 1100K swingarm was also shorter than the L, M and N, but still longer than the 750. Edited May 19, 2016 by crashtester Added the bit about it being longer than the 750. Quote
Radds Posted May 19, 2016 Author Posted May 19, 2016 So whether I use a 750 or 1100 frame, as I'm using. Single sided swing arm, there will be no difference, correct? Quote
boilerdude Posted May 20, 2016 Posted May 20, 2016 fronks are also shorter on the 750s are they not? Quote
Del Posted May 22, 2016 Posted May 22, 2016 (edited) On 19/05/2016 at 5:03 AM, crashtester said: The 1100K swingarm was also shorter than the L, M and N, but still longer than the 750. The 1100k arm is 10mm longer than the 750l/m arms .The 1100l/m/n arms are 10mm longer than the 1100k arm. On 20/05/2016 at 3:51 AM, boilerdude said: fronks are also shorter on the 750s are they not? Yep,but only because 1100 fronts have top mount clip-ons,750 clip-ons sit under the top yoke I have a 750l(along with 750l wheels and 750j/k bodywork) front end on my 1100k,they are dropped through the top yoke by 30mm(this improved the handling) . Edited May 22, 2016 by Del 1 Quote
Del Posted May 22, 2016 Posted May 22, 2016 (edited) On 19/05/2016 at 1:32 PM, Radds said: So whether I use a 750 or 1100 frame, as I'm using. Single sided swing arm, there will be no difference, correct? Only if you use the 88/89 750j/k frames,they are physically smaller than the later frames. The 750l frame is the same dimensions as the 1100k frame,but the 750l frame weighs a fraction more because of the different swingingarm bolt and castellated adjuster.The 1100k frame also has a removable top shock mount like the 750's(the 1100l/m/n frames don't have one,it is fixed).750m/n and 1100m/n frames are the same. And the 1100 fuel taps don't hit the rocker cover/Y hose fitting because they sit a fraction further back than the 750 ones(I got round this with the 750 tank on my 11k,by turning the tank rubber around on the front mount and a couple of washers on the rear mounts) Edited May 22, 2016 by Del Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.