Venom Posted May 11, 2016 Share Posted May 11, 2016 Is that true K1-K3 1000 headers will fit 1100 (N) ? Quote Link to comment
SiBag Posted May 11, 2016 Share Posted May 11, 2016 (edited) Yes. But you will have to give them a tweak. Spacing between the down pipes is different, so you have to pull them out. And they sit a little low, so they need bending up under the sump. A blow torches, a car jack and some swearing and ya sorted. There should be loads on here about doing it. Edited May 13, 2016 by SiBag 2 Quote Link to comment
Venom Posted May 12, 2016 Author Share Posted May 12, 2016 17 hours ago, SiBag said: Yes. But you will have to give them a tweak. Spacing between the down pipes is different, so you have to pull them out. And they sit a little low, so they need bending up under the sump. A blow torches, a car jack and some swearing on ya sorted. There should be loads on here about doing it. thank you for info Quote Link to comment
boilerdude Posted May 24, 2016 Share Posted May 24, 2016 (edited) So they also fit blandit? Worthy upgrade for cheap? Edited May 24, 2016 by boilerdude Quote Link to comment
VJ Posted May 25, 2016 Share Posted May 25, 2016 8 hours ago, boilerdude said: So they also fit blandit? Worthy upgrade for cheap? Worth it just to get rid of the mild steel scrap collector thats designed to rot out and split the serviceable stainless exhaust in 2. Quote Link to comment
boilerdude Posted May 26, 2016 Share Posted May 26, 2016 so an aftermarket gsxr header would work too then yes?? Quote Link to comment
370steve Posted May 26, 2016 Share Posted May 26, 2016 (edited) I have a GSXR1100 Akrapovic system on my B12 engined GS, fits very well, just hangs a little low for some folk! but that is due to the adapters needed for my frame clearance, you shouldnt have that problem with a stock engine in a stock frame Edited May 26, 2016 by 370steve 1 Quote Link to comment
boilerdude Posted May 26, 2016 Share Posted May 26, 2016 (edited) gsxr 1000 exhaust this thread is about. Yes we all know a gsxr1100 exhaust fits. this is about spreading apart the spacing and retrofitting gsxr ONE THOUSAND headers on a bandit. ONE THOUSAND. Hence the K1, K2, K3 Edited May 26, 2016 by boilerdude Quote Link to comment
boilerdude Posted May 26, 2016 Share Posted May 26, 2016 Yea I didn't mean to come off too prickish. Just keeping the train on the rails thats all. 1 Quote Link to comment
boilerdude Posted May 26, 2016 Share Posted May 26, 2016 actually that was useful information irregardless. If a gsxr 1000 exhaust hangs low on an 1100. And a gsxr 1100 exhaust hangs low on a bandit. Then a gsxr 1000 exhaust on a bandit should hang really really low. That is good information to have. Quote Link to comment
SiBag Posted May 26, 2016 Share Posted May 26, 2016 6 hours ago, boilerdude said: actually that was useful information irregardless. If a gsxr 1000 exhaust hangs low on an 1100. And a gsxr 1100 exhaust hangs low on a bandit. Then a gsxr 1000 exhaust on a bandit should hang really really low. That is good information to have. Erm no Look at the pic, he has about an inch to 2 inches of extra pipe where it fits to the motor. You can get the thou headers quite tight to the dump with a bit of effort. Quote Link to comment
fish91 Posted May 27, 2016 Share Posted May 27, 2016 (edited) On 11/05/2016 at 2:08 PM, SiBag said: Yes. But you will have to give them a tweak. Spacing between the down pipes is different, so you have to pull them out. And they sit a little low, so they need bending up under the sump. A blow torches, a car jack and some swearing and ya sorted. There should be loads on here about doing it. ^^ this on a gsxr1100, i will soon be trying on my bandit so will report back with measurements etc Edited May 27, 2016 by fish91 Quote Link to comment
boilerdude Posted May 27, 2016 Share Posted May 27, 2016 I took the easy way out. Talked with a buddy of mine who just so happens to have an extra b12 yosh header. I just swapped the 750m carbs on my bandit. I'm trading him my old bandit carbs.. Quote Link to comment
boilerdude Posted May 27, 2016 Share Posted May 27, 2016 also yes I see now. thats a gs1000 I overread that part. And I see those little extenders he's got there. Quote Link to comment
fatblokeonbandit Posted May 27, 2016 Share Posted May 27, 2016 My old 7/11 with gsxr 1000 downpies, we couldn't make them fit by bending so a mate cut and shut them.. weigh fek all 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.