clivegto Posted March 27, 2016 Share Posted March 27, 2016 Why would fuel pour out of the 2 air jet thingys at the back of number 2 carb, bike is not firing on that cylinder but has a good spark. Ideas please. Quote Link to comment
Captain Chaos Posted March 27, 2016 Share Posted March 27, 2016 sticky float needle 1 Quote Link to comment
Phill106 Posted March 29, 2016 Share Posted March 29, 2016 I have same problem, been told it's a bad seal inside passing fuel. Quote Link to comment
Paulm Posted March 29, 2016 Share Posted March 29, 2016 I would have thought the float valve as well Clive Quote Link to comment
fatblokeonbandit Posted March 29, 2016 Share Posted March 29, 2016 They all do it after a few years, as above the float valves not shutting, normally because a bit of crap from the tank has go stuck in the seat. Careful it doesn't all go down the bore and fill the sump 1 Quote Link to comment
Fula28 Posted March 29, 2016 Share Posted March 29, 2016 B12 carbs I fitted on mates Westfield did same , new needle seats and bowl seals. Quote Link to comment
clivegto Posted March 30, 2016 Author Share Posted March 30, 2016 Striped them down cleaned them with carb cleaner blew them out with a air line and reset the float heights and they work now. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.