clivegto Posted March 27, 2016 Posted March 27, 2016 Why would fuel pour out of the 2 air jet thingys at the back of number 2 carb, bike is not firing on that cylinder but has a good spark. Ideas please. Quote
Phill106 Posted March 29, 2016 Posted March 29, 2016 I have same problem, been told it's a bad seal inside passing fuel. Quote
Paulm Posted March 29, 2016 Posted March 29, 2016 I would have thought the float valve as well Clive Quote
fatblokeonbandit Posted March 29, 2016 Posted March 29, 2016 They all do it after a few years, as above the float valves not shutting, normally because a bit of crap from the tank has go stuck in the seat. Careful it doesn't all go down the bore and fill the sump 1 Quote
Fula28 Posted March 29, 2016 Posted March 29, 2016 B12 carbs I fitted on mates Westfield did same , new needle seats and bowl seals. Quote
clivegto Posted March 30, 2016 Author Posted March 30, 2016 Striped them down cleaned them with carb cleaner blew them out with a air line and reset the float heights and they work now. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.