spiderpig Posted July 31 Posted July 31 Is the chain guide bolted to the underside of the cam cover on the b12 needed? I've a low profile breather I want to fit but the bolts for the guide are in the way Quote
TonyGee Posted July 31 Posted July 31 3 hours ago, spiderpig said: Is the chain guide bolted to the underside of the cam cover on the b12 needed? I've a low profile breather I want to fit but the bolts for the guide are in the way never removed one from an engine but i can't see an issue ??????? the chain isn't gona hit the cam cover unless its waaaay to loose Quote
spiderpig Posted July 31 Author Posted July 31 That was my thinking... But then why did they fit it? Quote
colinworth79 Posted July 31 Posted July 31 The chain guide bolts in from the top. Change was due to fitting a hyvo chain . There is no idler gear between the cams on a bandit motor. Just grind couple small bits out of the brether box or use couple of counter sunk screws. 1 Quote
wraith Posted July 31 Posted July 31 I notched out the breather on the inside of the breather where the bolts go. In my gsx1157et project posts 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.