wraith Posted July 17 Posted July 17 Is there any other sprocket carrier that fits the srad wheel, preferably that's a bit thinner Quote
wraith Posted July 17 Author Posted July 17 20 minutes ago, R1guy said: An Srad sprocket carrier that’s been machined down? Quote
clivegto Posted July 17 Posted July 17 (edited) Busa and TL early one's are the same as 750 srad bud Edited July 17 by clivegto 2 Quote
wraith Posted July 20 Author Posted July 20 On 7/17/2024 at 9:47 PM, clivegto said: Busa and TL early one's are the same as 750 srad bud Do you know if there is any difference in the 600 srad and 750 srad, busa, TL ? Just going to have a play (later in the year) with putting a srad 6" rear wheel in my kat just because Quote
clivegto Posted July 20 Posted July 20 3 minutes ago, wraith said: Do you know if there is any difference in the 600 srad and 750 srad, busa, TL ? Just going to have a play (later in the year) with putting a srad 6" rear wheel in my kat just because That's a good question but I don't know for sure. Swinging arms and wheels are interchangeably so I would assume they are. Could have slightly different offset though. 1 Quote
wraith Posted July 20 Author Posted July 20 19 minutes ago, clivegto said: That's a good question but I don't know for sure. Swinging arms and wheels are interchangeably so I would assume they are. Could have slightly different offset though. I with thinking something similar, as the 600 srad has a 5.5" wheel and the 750 srad has a 6" as well as the busa and TL Quote
DAZ Posted July 21 Posted July 21 (edited) I would think you may need to look at a sprocket carrier from something a 'size smaller' something like a GS500 twin as I'm presuming they would be a narrower swing arm,wheel Etc though obviously no guarantee it'll fit the wheel and no doubt you'd need to change the bearing to suit the srad spindle ..... Edit: if the srad one is just a few mm too wide and you don't want to machine it could a dished rear sprocket fitted the "wrong" way help with chain alignment ? Same with the front a zx6r front sprocket is 6mm offset apparently ... Edited July 21 by DAZ Addition 1 Quote
Jonny Posted July 31 Posted July 31 On 7/20/2024 at 7:23 PM, wraith said: I with thinking something similar, as the 600 srad has a 5.5" wheel and the 750 srad has a 6" as well as the busa and TL I have both wheels and the sprocket carrier is the same. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.