GS1000 frame, angles

[Reinhoud]

I've had an accident with my GS1000, the frame is bend, another frame is not an option, can't find one where I live, having one send over is way too expensive..

Thinking of fixing the frame, but I'd like to know some angles before I make a decision.

 

I'd like to know the angle of both the top tubes, with the angle gauge on. I zero'd the gauge on the bottom tube under the engine. 

When you have a good look you can see where the frame is bend.

The angle in the top tubes already would help, mine is kinked in the bend.

 

Thanks

[TonyGee]

I think the way to go is on a jig. 

[Reinhoud]

Still need to know the angles..

 

[Dezza]

Go to place with bent frames has always been Motoliners in Maidstone. I'd be amazed if they've never done a GS1000 frame before and may well have data and suggestions as to what to do with your bent frame if it is not feasible to get it to them

https://www.motoliner.com/

[clivegto]

He's in Tasmania @Dezzamight be a bit far for him 

[TonyGee]

1 hour ago, Reinhoud said:

Still need to know the angles..

 

if you have the angles how are you gona bend it and keep the wheel alignment straight ?

[Reinhoud]

If I know the angles I can first see if the tubes are bent or not, then I can cut out the damaged parts, get new pipe and bend it and weld it in.

 

You'll be amazed what you can do with an angle gauge, and probably a jig, but first I need the angle before I can do a proper job, or else I need to guess

[Dezza]

2 hours ago, clivegto said:

He's in Tasmania @Dezzamight be a bit far for him 

They have email. Maybe they can provide some figures and tips on what to look for