Bandit 1200 rear wheel sprocket carrier

[Kevref]

Can anyone advise if they have found a rear wheel sprocket carrier that fits a standard 1200 bandit wheel and brings the width down to help sprocket alignment? 

thanks

[wraith]

Try this one in oil cooled 

[Kevref]

Hi Wraith

sorry should have made it clearer , I meant a 1200 bandit rear wheel in a GS frame with a bandit 1200 swing arm 

[Jonny]

You can have a few mill shaved off the sprocket face to get it to work. You are probably already using an off-set front sprocket, right?

[TonyGee]

2 hours ago, Kevref said:

Can anyone advise if they have found a rear wheel sprocket carrier that fits a standard 1200 bandit wheel and brings the width down to help sprocket alignment? 

thanks

yep, a GSX750/1100 1980-82 fit the B12 wheel.  I used one on mine (GSX750ET)   also an offset front sprocket needed. 

[Kevref]

Yes will be using an offset front sprocket.. am struggling as its an early GS750 and am very limited by the clutch push rod housing on the left engine case..

was thinking of getting longer clutch push rod and gear  selector  shaft fabricated and use spacers on the plate fixing points if I cant get the clearance with sprocket carriers etc 

[mkoppeser]

On 9/20/2022 at 10:21 AM, Kevref said:

Can anyone advise if they have found a rear wheel sprocket carrier that fits a standard 1200 bandit wheel and brings the width down to help sprocket alignment? 

thanks

Hi Kevref

I used the stock sprocket carrier from my 78 GS1000 in the 2002 1200 Bandit rear wheel that I have fitted on my GS to bring down the width.

Mark

[Kevref]

Thanks Mark…