Harris Magnum 2x2

[clivegto]

2x2 because its my second one. Got it a couple of years ago of another site member. Been collecting bits to do this one more like Harris originally intended for a while now. Any way I took the original Harris exhaust to get ceramic coated before lock down and today I picked it up 

  

Edited September 7, 2022 by clivegto

[clivegto]

This is the frame the day I picked it up. The mag 4 style tank is on my other Magnum but I have a  mag 2 tank for this. 

 

[busa ash]

looking forward to this evolving  clive 

[clivegto]

Just a little bit more to the puzzle. John Schoon made me a rather nice faring stay which I picked up at Stafford bike show.  

[Loudpipes]

Surprised you have any room for chickens with the amount of bikes n bits you have clive.

[clivegto]

1 hour ago, Loudpipes said:

Surprised you have any room for chickens with the amount of bikes n bits you have clive.

Sometimes it does overflow. 

But not as many as Will . 

Edited April 22 by clivegto

[BasilBrush]

Looks very similar to this Harris Gs1000. Sadly not my bike just out of my picture collection.

Tis a beauty and nice that they kept the GS 1000 motor . Looks like  `H` section Dymags, could be wrong

 

[clivegto]

6 hours ago, BasilBrush said:

Looks very similar to this Harris Gs1000. Sadly not my bike just out of my picture collection.

Tis a beauty and nice that they kept the GS 1000 motor . Looks like  `H` section Dymags, could be wrong

 

Nice looking bike that is. Fairing bracket is for mk2 faring. 

[clivegto]

So when I picked the wheels up from the powder coaters for the Turbo Magnum I dropped my other Magnum frame of to be coated. Today I went to pick it up, it's what they call candy red to me it's a dark almost chrome red which is what I wanted .      

Edited Tuesday at 03:27 PM by clivegto

[Allspeeds]

How’s much did they charge you for that Clive if you don’t mind?

[clivegto]

1 hour ago, Allspeeds said:

How’s much did they charge you for that Clive if you don’t mind?

Wasn't cheap mate 384 quid  including vat for frame arm and spring but it's mint and only 31 miles away from me. Probably not going to use the standard arm so could have saved a few quids. 

[Allspeeds]

Are right so that’s about what I’ve been quoted for mine in a custom colour so strip/powder coat prime

wet paint colour then powder coat clear is £250 plus vat 

[clivegto]

Yes. 

[Dezza]

50 minutes ago, clivegto said:

Wasn't cheap mate 384 quid  including vat for frame arm and spring but it's mint and only 31 miles away from me. Probably not going to use the standard arm so could have saved a few quids. 

If you don't use the stock swingarm i'd be interested in buying it

[clivegto]

57 minutes ago, Dezza said:

If you don't use the stock swingarm i'd be interested in buying it

Why? 

[Dezza]

I want to put my bike back to 80s spec

[clivegto]

30 minutes ago, Dezza said:

I want to put my bike back to 80s spec

Might be tempted with swapsies 

[Dezza]

1 hour ago, clivegto said:

Might be tempted with swapsies 

What for?

[clivegto]

Just now, Dezza said:

What for?

Your swinging arm that's presently in your Harris. 

[Dezza]

Oh, probably not then. I still want to keep the front and rear ends on it at present.

[clivegto]

Triumph front end. 

[clivegto]

My other Harris came with an EMC shock which I didn't use on that but will use on this one. Cleaned up alright I recon.  

[Allspeeds]

Have you got harris mag rearsets for this Clive? Il be selling mine ones there back from polishing if you need any? All original pegs levers etc trimmed and pocketed as people did to lighten them I also got a set of TL1000 Harris rearsets with bike (new style) which have same hole centres so guess the guys was possibly going to fit later style ones are on they will be for sale to

[clivegto]

I have these original one's but yes I'm interested in both sets. 

[Allspeeds]

Sound just send me a message buddy