george 1100 Posted February 26, 2022 Posted February 26, 2022 I'm thinking I might take this on during the winter months but can't find enough info on the web. I've got an excellent 09 1000 clutch assembly but it doesn't look too straight forward so before I pull out the bandit clutch, has anyone ever done this mod that can also share some step by step knowledge. Quote
clivegto Posted February 26, 2022 Posted February 26, 2022 @370stevehas one in his latest project. 1 Quote
dupersunc Posted February 26, 2022 Posted February 26, 2022 I've got a Sigma after market slipper in my 1216 motor. They are a bit border line in taking the power from 160+ bhp motors but its worked fine for me with 157bhp. 2 Quote
Kamikaze Posted February 26, 2022 Posted February 26, 2022 7 minutes ago, dupersunc said: I've got a Sigma after market slipper in my 1216 motor. They are a bit border line in taking the power from 160+ bhp motors but its worked fine for me with 157bhp. yeah thats what i was going to go for as well Duncan. I wont be pushing anymore than 150-155 out of her. but i keen to see how it performs on track. How do you find it...? Quote
dupersunc Posted February 26, 2022 Posted February 26, 2022 32 minutes ago, Kamikaze said: yeah thats what i was going to go for as well Duncan. I wont be pushing anymore than 150-155 out of her. but i keen to see how it performs on track. How do you find it...? To be honest I've never really need a slipper on il4 bikes my riding style doesn't need one and I was happy to modulate the clutch lever if I did get any rear locking. However when I was offered one free to try it seemed silly not to. I do feel it working, I guess it has allowed me to go a bit deeper on the brakes, as it gives little more stability. I would say it's a nice thing to have, rather than a must have on oil cooled track bikes 3 Quote
370steve Posted February 26, 2022 Posted February 26, 2022 7 hours ago, george 1100 said: I'm thinking I might take this on during the winter months but can't find enough info on the web. I've got an excellent 09 1000 clutch assembly but it doesn't look too straight forward so before I pull out the bandit clutch, has anyone ever done this mod that can also share some step by step knowledge. you just need the basket to go with one, i had SNT Race Engineering sort my basket, they took my B12 basket apart and fitted the billet basket to the B12 bits, only mods were a small chamfer to the No4 con rod bolt to get clearance on the basket. sticks out just a little bit further than stock clutch, i fitted an MTC spacer (overkill) but a much smaller one will do. 5 Quote
george 1100 Posted February 27, 2022 Author Posted February 27, 2022 21 hours ago, dupersunc said: To be honest I've never really need a slipper on il4 bikes my riding style doesn't need one and I was happy to modulate the clutch lever if I did get any rear locking. However when I was offered one free to try it seemed silly not to. I do feel it working, I guess it has allowed me to go a bit deeper on the brakes, as it gives little more stability. I would say it's a nice thing to have, rather than a must have on oil cooled track bikes That's the reason I want to fit one, so I can improve on the hard braking and fast gearing down corners but agree, not a must have. 1 Quote
george 1100 Posted February 27, 2022 Author Posted February 27, 2022 370Steve, so they made a billet basket, not used the 1000 basket? The 1000 basket looks like it has very similar rivet spacing which would make the process easier. Does anyone have a bandit basket on a bench to measure the rivet spacing? 1 Quote
370steve Posted February 27, 2022 Posted February 27, 2022 (edited) 2 hours ago, george 1100 said: 370Steve, so they made a billet basket, not used the 1000 basket? The 1000 basket looks like it has very similar rivet spacing which would make the process easier. Does anyone have a bandit basket on a bench to measure the rivet spacing? no idea if the 1000 basket will fit mate, i just got into talks with SNT for one after seeing their B12 race engine with one fitted. Edited February 27, 2022 by 370steve Quote
clivegto Posted February 27, 2022 Posted February 27, 2022 9 hours ago, george 1100 said: The 1000 basket looks like it has very similar rivet spacing which would make the process easier. Does anyone have a bandit basket on a bench to measure the rivet spacing? Just so happens I do today 2 Quote
george 1100 Posted March 1, 2022 Author Posted March 1, 2022 On 2/28/2022 at 3:59 AM, clivegto said: Just so happens I do today Can you happen to be able to count the output shaft splines or count the hub splines? Quote
clivegto Posted March 1, 2022 Posted March 1, 2022 10 hours ago, george 1100 said: Can you happen to be able to count the output shaft splines or count the hub splines? Took a couple of pictures counting make me dizzy got to 6 on the output shaft Quote
george 1100 Posted March 2, 2022 Author Posted March 2, 2022 Cheers. Shaft size and spline looks the same. The bearing and race are the same also. So far this looks like an easy mod as long as I can find someone to rivet it together 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.