Reinhoud Posted June 24, 2021 Posted June 24, 2021 On 6/6/2021 at 6:42 PM, Allspeeds said: Now the results were surprisingly low the bike was fully stock except it’s Japanese 4-1 full system with baffle fitted , it only made 154hp! Bit we had a base line to go from so next job baffle out results-164Hp! we’re going the rite way so next step was obviously been a Dynojet centre I fitted a PCV now before people jump in the early ECUs are not supported by woolich so I couldn’t flash the ecu however I only want to change the fueling so the PCV does this job just fine so on we go 166Hp with spot on fueling however the stock air box is very restricted so I then fitted a Sprint P08 Air filter and cut the bottom of the air box out increasing it’s intake bye double and with a remap we hit 168Hp The local Dyno here also isn't as optimistic as what you see most of the times.. Busa's crank out about 160HP. My mates CBR1000rr from 2012 cranks out 148HP 1 Quote
Allspeeds Posted June 24, 2021 Author Posted June 24, 2021 On 6/21/2021 at 10:39 AM, MrS819 said: Where did you get the radiator from? M&P then had it shortened Quote
Allspeeds Posted June 24, 2021 Author Posted June 24, 2021 10 hours ago, Reinhoud said: The local Dyno here also isn't as optimistic as what you see most of the times.. Busa's crank out about 160HP. My mates CBR1000rr from 2012 cranks out 148HP Mine isn’t optimistic it’s accurate 1 Quote
baldrick Posted August 1, 2021 Posted August 1, 2021 On 6/24/2021 at 10:14 PM, Allspeeds said: Mine isn’t optimistic it’s accurate it is accurate, mine only made 158 with cheap aftermarket exhaust, cheap can and baffle in it, and that was after a engine rebuild, so its probably about right. any progress? Quote
Allspeeds Posted August 1, 2021 Author Posted August 1, 2021 Big pile of parts to fit waiting had no time lately delivery from DME due Monday waiting for yokes and bar’s arriving soon then il hit it in one go I recon 1 Quote
Allspeeds Posted August 10, 2021 Author Posted August 10, 2021 Cobbled this together this morning 5 Quote
Allspeeds Posted August 15, 2021 Author Posted August 15, 2021 Thanks guys waiting for offset yokes cuming now and bars etc to finish front end I’m seriously considering cutting frame rails and going hole hog to ditch the tank grudge style 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.