rerb Posted January 16, 2021 Posted January 16, 2021 For busa pistons on std rods, should I used the wrist pins that came with the busa pistons, or the ones that were originally in the motor? thanks. Quote
Gixer1460 Posted January 16, 2021 Posted January 16, 2021 Use the ones that have the less play in the rods and pistons - if no discernible play then either will work ok. Alternatively which ones have the smallest internal bore as these will be stronger especially in a boosted application. 1 Quote
colinworth79 Posted March 6, 2021 Posted March 6, 2021 On 2/28/2021 at 3:48 AM, Reinhoud said: I've got set brand new ones, 18mm You want 20mm for an oilcooled motor . Sounds like you have gen 2 pistons which wont work . 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.