Kraptanaman Posted August 13, 2020 Posted August 13, 2020 How many teeth does a gsx1100 rear sprocket have and if i go to 530 pitch do i need to compensate for that? Quote
Gixer1460 Posted August 13, 2020 Posted August 13, 2020 42 teeth. Final drive ratio's are subject to teeth count not chain size. 15:42 is the same for 530 or 630! 1 Quote
GSX1100dreamn Posted August 13, 2020 Posted August 13, 2020 (edited) Here is a picture of a 530 pitch 18 tooth on the left and a 630 pitch 15 tooth on the right. The only difference will be sprocket diameter as seen below, some people go 17 or 18 stop the chain cutting into the swingarm by maintaining the same diameter. As Gixer1460 said then count teeth depending on the front sprocket used. Edited August 13, 2020 by GSX1100dreamn 1 Quote
GSX1100dreamn Posted August 19, 2020 Posted August 19, 2020 I forgot to mention that 530 pitch 18 tooth is off a 07 1250 Bandit. They have the same countershaft spline as the GSX1100 so can be used as a 530 front sprocket conversion. Quote
RGSX Posted August 19, 2020 Posted August 19, 2020 1 hour ago, GSX1100dreamn said: I forgot to mention that 530 pitch 18 tooth is off a 07 1250 Bandit. They have the same countershaft spline as the GSX1100 so can be used as a 530 front sprocket conversion. if using the bandit sprocket would it still require a shim for a 530 conversion? Quote
fab Posted August 20, 2020 Posted August 20, 2020 yes i'm sure it would"and it would be a 6mm spacer on the outside of the sprocket then locking washer and nut. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.