Hardassfunk Posted September 10, 2019 Posted September 10, 2019 Looking to change the swingarm onthe GSX750W over winter ideally I just want something about longer.Anyone changed theirs or know of any others that fit? Quote
snoorder Posted September 10, 2019 Posted September 10, 2019 I've seen a guy on FB put a GSX 1400 arm in it. No clue about the measurements though... Quote
Duckndive Posted September 10, 2019 Posted September 10, 2019 4 hours ago, Hardassfunk said: Looking to change the swingarm onthe GSX750W over winter ideally I just want something about longer.Anyone changed theirs or know of any others that fit? I,m lead to believe that the pivot is the same width as a Blandit ...But not measured it I,d be interested in the zuma arm if you decide to sell it ? I also have a 750 Air box that will be up for sale once I get the motor out Quote
Hardassfunk Posted September 10, 2019 Author Posted September 10, 2019 (edited) What about TL1000R swingarm? Width at Pivot for the TLS and TLR (including dust covers) is 232mm Pivot shaft is 25mm Dia Centre of pivot to rear axle in mid adjustment position is approx 512mm GSX1400 swingarm dimensions Width of swingarm at pivot point 23.5 cm Length from pivot point to axle from pivot point center to Minimum axle center 56.3 cm maximum axle center 58.7 cm Diameter of pivot point bolt/axle 2.6 cm Edited September 10, 2019 by Hardassfunk Quote
Hardassfunk Posted September 10, 2019 Author Posted September 10, 2019 Found a list of other swingarm pivot widths any know the pivot width for the Inazuma? swing arm pivot widths (width where the swingarm pivots in the frame). If you know additional pivot widths or have pivot bolt diameter information, post it up. Gurls blouse VTR SUPERHAWK (all years) - 165mm Gurls blouse VFR 800 (1998-2001) - 165mm Gurls blouse CBR 929 (2000-2001) - 180mm Gurls blouse CBR 954RR (2002-2003) - 180mm Gurls blouse RC51 SP2 (2002-?) - 180mm 1976 Suzuki GT500 - 185mm Yamaha XS650 - 190mm Gurls blouse VFR400 - 192mm Gurls blouse MC18 NSR250 - 197mm Yamaha FZR250 - 200mm Gurls blouse XL600R - 200mm Yamaha LC RD350 - 200mm Gurls blouse RVF400 - 202mm Gurls blouse NS400R - 205mm Gurls blouse MC21 NSR250 - 205mm Gurls blouse CB400F - 205mm Suzuki RGV250 - 205mm Yamaha RZ350 - 205mm Yamaha YPVS RD350 - 205mm 1986 FZ600 - 215mm (without spacers/covers), - 220mm with spacers/covers Suzuki Bandit GSF600 - 220mm 1992-1998 Yamaha Seca II - 220mm 1990-1996 Yamaha FZR600 - 220mm 2005 Suzuki GSXR 1000 - 225mm 1976-1982 Kawasaki KZ600 - 225mm 1994-1997 Gurls blouse VFR750 - 227mm 2001-2002 Suzuki GSXR1000 - 228mm Kawasaki Z650/Z750 - 230mm (frame width at pivot) 2004-2005 Suzuki GSXR750 - 230mm (without washers on ends) Suzuki TL1000S - 232mm Gurls blouse Hawk GT650 - 235mm Gurls blouse RC30 - 235mm 2008 Kawasaki Ninja ZX6R - 235mm Kawasaki Z900/Z1000 - 235mm (frame width at pivot) Gurls blouse RC30 - 235mm 1999-2002 Suzuki SV650 - 235mm 2006 Suzuki GSR500 - 238mm (w/o spacers) 2003-2009 Suzuki SV650 - 240mm 1998-2007 Yamaha YZF600R - 240mm 1990-1993 Gurls blouse VFR750 - 242mm 2005-2006 Kawasaki Ninja ZX6R (636) - 242mm 1987 Kawasaki Ninja ZX750R - 244mm 1987 Yamaha FZ750 - 245mm 2006-2011 Kawasaki Ninja 650R - 245mm 1998-2003 Suzuki Katana GSX600/750F - 245mm 2007 Yamaha YZF-R6 - 248mm Gurls blouse RC45 - 250mm Ducati SR4S - 255mm 2003 Kawasaki Z1000 - 255mm MV Agusta F4 - 255mm Kawasaki ZX10R (Gen 1-3) - 257mm 2002-2005 Yamaha FZ1 - 257mm (20mm pivot bolt) 2001 Yamaha YZF-R1 - 250mm 2003-2006 Yamaha YZF-R1 - 260mm (without caps) - 264mm (with caps) Triumph 955i - 285mm BMW K100 - 310mm 1 Quote
snoorder Posted September 11, 2019 Posted September 11, 2019 Suddenly it came to my mind that I did some measuring on my Inazuma 1200 when I was changing sprockets and chain. Swingarm pivot width 236 mm Swingarm pivot axle 20 mm Swingarm length (pivot axle - wheel axle mid position) 560 mm Distance pivot axle - shock mount 485 mm Wheel spindle 20 mm Internal width at wheel 261 mm Hope this helps! 2 Quote
Hardassfunk Posted September 11, 2019 Author Posted September 11, 2019 1 hour ago, snoorder said: Suddenly it came to my mind that I did some measuring on my Inazuma 1200 when I was changing sprockets and chain. Swingarm pivot width 236 mm Swingarm pivot axle 20 mm Swingarm length (pivot axle - wheel axle mid position) 560 mm Distance pivot axle - shock mount 485 mm Wheel spindle 20 mm Internal width at wheel 261 mm Hope this helps! That's great guessing the 750 is the same.The GSX1400 could be a good option Quote
Hardassfunk Posted September 11, 2019 Author Posted September 11, 2019 21 hours ago, Duckndive said: I,m lead to believe that the pivot is the same width as a Blandit ...But not measured it I,d be interested in the zuma arm if you decide to sell it ? I also have a 750 Air box that will be up for sale once I get the motor out If I find an arm that fits you have first dibs or swaps 1 Quote
rdubandit Posted September 11, 2019 Posted September 11, 2019 9 hours ago, Swiss Toni said: 'Sticky' this??? Yes, please but perhaps the OP could consider changing the title of the thread? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.